No matter if it’s for your personal security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are all the time working is imperative. In reality, bulbs are wearing parts that will obviously burn out in the long run and consequently need to be swapped out. You’re certainly here because one of your rear turn signals is burnt out and you’re wondering how to change the bulb of a rear turn signal on you Fiat Panda 2, we’ve created this content to help you do it all on your own without having to go to your repair shop. In a first step, we will examine the checking a burnt-out rear turn signal bulb on your Fiat Panda 2 and in a second step, how to change the rear turn signal bulb on your Fiat Panda 2.
How to find out if the rear turn signal bulb on your Fiat Panda 2 is burnt-out or needs to be replaced?
When you drive your vehicle you don’t all the time have the possibility to verify all the security features of your Fiat Panda 2. In reality, you are often times in a hurry and tend to get into your vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is therefore necessary to make the effort to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Fiat Panda 2, but you didn’t perceive it. Here are the two basic methods to verify if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Fiat Panda 2, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By paying attention to the sound of your turn signals. In fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Fiat Panda 2, you will detect that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to change, like the one of your low beam Fiat Panda 2 or your position lights on Fiat Panda 2, don’t be reluctant to read our publications to help you to complete this substitution.
Changing the rear turn signal bulb on my Fiat Panda 2
Now let’s go to the most instersting step of this article content, how to change the rear turn signal bulb on Fiat Panda 2? Take note that this operation is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Fiat Panda 2, see our dedicated content page. On the other hand, here are the detailed steps to adhere to in order to accomplish this act properly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Fiat Panda 2. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning correctly
.
If you need more guides on the Fiat Panda 2, go to our Fiat Panda 2 category.
