No matter if it’s for your personal safety, for roadworthiness tests or to prevent a fine, being certain your turn signal bulbs are always functioning is fundamental. In truth, bulbs are wearing parts that will predictably burn out over time and therefore need to be swapped out. You’re most probably on this page because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Fiat Idea, we’ve made this content to help you do it without any help without having to go to your repair shop. To begin , we will examine the checking a burnt-out rear turn signal bulb on your Fiat Idea and in a second step, how to change the rear turn signal bulb on your Fiat Idea.
How to be sure if the rear turn signal bulb on your Fiat Idea is burnt-out or needs to be replaced?
When you drive your vehicle you don’t always have the occasion to check all the safety features of your Fiat Idea. In truth, you are quite often on the go and tend to get into your vehicle, make your journey and put it down right away without taking the time to do an occasional check-up. It is due to this fact important to spend some time to in some instances check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Fiat Idea, but you didn’t identify it. Here are the two basic solutions to check if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Fiat Idea, then alternately turn on your left and right rear turn signals and get out of the car to check that they are efficient.
- By listening to the sound of your turn signals. In truth, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Fiat Idea, you will detect that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Fiat Idea or your position lights on Fiat Idea, don’t be reluctant to consult our articles to help you to complete this replacement.
Replacing the rear turn signal bulb on my Fiat Idea
Now let’s go to the most important step of this content, how to change the rear turn signal bulb on Fiat Idea? Take note that this operation is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Fiat Idea, see our dedicated article content. Nevertheless, here are the full description to adhere to to be able to execute this process correctly:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Fiat Idea. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning properly
.
If you have any further questions about the Fiat Idea, do not hesitate to consult our Fiat Idea category.
