No matter if it’s for your personal security, for roadworthiness tests or to avoid a fine, being certain your turn signal bulbs are always functional is critical. Obviously, bulbs are wearing auto parts that will inevitably burn out over time and as a result need to be replaced. You’re most certainly here because one of your rear turn signals is burnt out and you’re wondering how to change the bulb of a rear turn signal on you Fiat Bravo 2, we’ve posted this article to help you do it alone without having to go to your motor mechanic. To begin , we will check out inspecting a burnt-out rear turn signal bulb on your Fiat Bravo 2 and in a second step, how to replace the rear turn signal bulb on your Fiat Bravo 2.

change-rear-turn-bulb-fiat-bravo-2

How to be sure if the rear turn signal bulb on your Fiat Bravo 2 is burnt-out or needs to be changed?

When you drive your vehicle you don’t always have the occasion to examine all the security features of your Fiat Bravo 2. Obviously, you are often times in a hurry and tend to get into your vehicle, make your trip and put it down instantly without taking the time to do an occasional check-up. It is therefore essential to make the effort to on occasions examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Fiat Bravo 2, but you didn’t detect it. Here are the two ordinary solutions to examine if a rear turn signal on your car is out of order or if you need to replace it quickly:

  • When you stop, turn on the ignition on your Fiat Bravo 2, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functional.
  • By paying attention to the sound of your turn signals. In truth, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Fiat Bravo 2, you will recognize that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first technique shown above.

You may have another bulb to replace, like the one of your low beam Fiat Bravo 2 or your position lights on Fiat Bravo 2, don’t be reluctant to consult our content articles to help you to complete this replacement.

Replacing the rear turn signal bulb on my Fiat Bravo 2

Now let’s go to the most instersting step of this content, how to replace the rear turn signal bulb on Fiat Bravo 2? Please note that this technique is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Fiat Bravo 2, see our dedicated guideline. However, here are the detailed description to carry out to be able to perform this work correctly:

  • To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Change the rear turn signal bulb on your Fiat Bravo 2. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Remount your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning in the right way

If you have any additional questions about the Fiat Bravo 2, do not hesitate to consult our Fiat Bravo 2 category.