Whether for your own security, for roadworthiness tests or to prevent a fine, being certain your turn signal bulbs are always functional is extremely important. Obviously, bulbs are wearing parts that will predictably burn out as time passes and therefore need to be swapped out. You’re probably here because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Ds Ds 4, we’ve written and published this post to help you do it alone without having to go to your auto mechanic. To begin , we will have a look at inspecting a burnt-out rear turn signal bulb on your Ds Ds 4 and in a second part, how to change the rear turn signal bulb on your Ds Ds 4.
How to find out if the rear turn signal bulb on your Ds Ds 4 is burnt-out or needs to be replaced?
When you drive your vehicle you don’t always have the occasion to check all the security features of your Ds Ds 4. Obviously, you are often on the go and are likely to get into your vehicle, make your journey and put it down instantly without taking the time to do an occasional check-up. It is due to this fact important to make the effort to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Ds Ds 4, but you didn’t become aware of it. Here are the two basic methods to check if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Ds Ds 4, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functioning.
- By listening to the sound of your turn signals. In fact, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Ds Ds 4, you will perceive that the time between each “click” is much closer, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Ds Ds 4 or your position lights on Ds Ds 4, don’t hesitate to consult our publications to help you to realize this replacement.
Replacing the rear turn signal bulb on my Ds Ds 4
Now let’s go to the most important part of this content page, how to change the rear turn signal bulb on Ds Ds 4? You should be aware that this technique is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Ds Ds 4, see our specific article content. Nevertheless, here are the detailed steps to carry out in order to perform this process correctly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Ds Ds 4. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating effectively
.
In the event that you have any additional questions about the Ds Ds 4, do not hesitate to consult our Ds Ds 4 category.
