No matter if it’s for your personal security, for roadworthiness evaluation or to prevent a fine, being certain your turn signal bulbs are always functioning is very important. In fact, bulbs are wearing auto parts that will inevitably burn out in the long run and therefore need to be swapped out. You’re likely on this website because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Dodge Dart, we’ve put into writing this post to enable you do it by yourself without having to go to your repair shop. To begin , we will check out examining a burnt-out rear turn signal bulb on your Dodge Dart and in a second step, how to replace the rear turn signal bulb on your Dodge Dart.
How to find out if the rear turn signal bulb on your Dodge Dart is burnt-out or needs to be changed?
When you drive your automobile you don’t always have the opportunity to verify all the security features of your Dodge Dart. In fact, you are often times in a rush and are likely to get into your automobile, make your journey and put it down straight away without taking the time to do an occasional check-up. It is therefore essential to take some time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Dodge Dart, but you didn’t identify it. Here are the two simple methods to verify if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Dodge Dart, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By listening to the sound of your turn signals. In fact, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Dodge Dart, you will notice that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to replace, like the one of your low beam Dodge Dart or your position lights on Dodge Dart, don’t be reluctant to consult our articles to help you to do this substitution.
Replacing the rear turn signal bulb on my Dodge Dart
Now let’s go to the most important step of this article, how to replace the rear turn signal bulb on Dodge Dart? Please note that this technique is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Dodge Dart, see our specific article content. Nevertheless, here are the detailed description to stick to to be able to perform this work properly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Dodge Dart. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating effectively
.
Whenever you have any further questions about the Dodge Dart, do not hesitate to consult our Dodge Dart category.
