Whether for your personal security, for roadworthiness tests or to prevent a fine, being sure your turn signal bulbs are constantly working is imperative. Indeed, bulbs are wearing devices that will predictably burn out with time and therefore need to be swapped out. You’re almost certainly on this page because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Dodge Charger, we’ve put into writing this post to enable you do it all on your own without having to go to your auto mechanic. In a first step, we will take a look at inspecting a burnt-out rear turn signal bulb on your Dodge Charger and in a second step, how to replace the rear turn signal bulb on your Dodge Charger.

change-rear-turn-bulb-dodge-charger

How to find out if the rear turn signal bulb on your Dodge Charger is burnt-out or needs to be changed?

When you drive your automobile you don’t constantly have the occasion to check all the security features of your Dodge Charger. Indeed, you are often times in a hurry and are likely to get into your automobile, make your journey and put it down immediately without taking the time to do an occasional check-up. It is as a result important to take the time to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Dodge Charger, but you didn’t perceive it. Here are the two basic methods to check if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:

  • When you stop, turn on the ignition on your Dodge Charger, then alternately turn on your left and right rear turn signals and get out of the car to check that they are operational.
  • By paying attention to the sound of your turn signals. In truth, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Dodge Charger, you will notice that the time between each “click” is much shorter, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first technique shown above.

You may have another bulb to replace, like the one of your low beam Dodge Charger or your position lights on Dodge Charger, don’t hesitate to have a look at our publications to help you to realize this replacing.

Replacing the rear turn signal bulb on my Dodge Charger

Now let’s go to the most important step of this article, how to replace the rear turn signal bulb on Dodge Charger? You should be aware that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Dodge Charger, see our specific content. However, here are the full description to carry out to be able to do this act properly:

  • To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take off the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Replace the rear turn signal bulb on your Dodge Charger. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating correctly

If you have any additional questions about the Dodge Charger, do not hesitate to consult our Dodge Charger category.