No matter if it’s for your personal safety, for roadworthiness evaluation or to avoid a fine, ensuring that your turn signal bulbs are constantly functioning is imperative. Surely, bulbs are wearing auto parts that will obviously burn out with time and consequently need to be replaced. You’re almost certainly on this page because one of your rear turn signals is burnt out and you’re wondering how to change the bulb of a rear turn signal on you Dodge Caliber, we’ve written this post to enable you do it without any help without having to go to your repair shop. To begin , we will check out examining a burnt-out rear turn signal bulb on your Dodge Caliber and in a second part, how to change the rear turn signal bulb on your Dodge Caliber.
How to be sure if the rear turn signal bulb on your Dodge Caliber is burnt-out or needs to be changed?
When you drive your car you don’t constantly have the opportunity to verify all the safety features of your Dodge Caliber. Surely, you are often in a hurry and are likely to get into your car, make your trip and put it down straight away without taking the time to do an occasional check-up. It is as a result fundamental to make the effort to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Dodge Caliber, but you didn’t notice it. Here are the two basic methods to verify if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Dodge Caliber, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By listening to the sound of your turn signals. In actual fact, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Dodge Caliber, you will realize that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to change, like the one of your low beam Dodge Caliber or your position lights on Dodge Caliber, don’t be reluctant to have a look at our articles to help you to realize this replacement.
Changing the rear turn signal bulb on my Dodge Caliber
Now let’s go to the most instersting part of this content page, how to change the rear turn signal bulb on Dodge Caliber? You should be aware that this method is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Dodge Caliber, see our specific article content. Nevertheless, here are the detailed steps to stick to to be able to conduct this process properly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Dodge Caliber. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating in the right way
.
If you wish more tutorials on the Dodge Caliber, go to our Dodge Caliber category.
