Whether for your personal safety, for roadworthiness testing or to prevent a fine, making sure your turn signal bulbs are constantly functioning is imperative. In reality, bulbs are wearing parts that will surely burn out over time and therefore need to be replaced. You’re likely in this article because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Citroen Xsara, we’ve written and published this content to teach you do it by yourself without having to go to your technician. To begin , we will take a look at the checking a burnt-out rear turn signal bulb on your Citroen Xsara and in a second part, how to replace the rear turn signal bulb on your Citroen Xsara.
How do you know if the rear turn signal bulb on your Citroen Xsara is burnt-out or needs to be replaced?
When you drive your vehicle you don’t constantly have the possibility to verify all the safety features of your Citroen Xsara. In reality, you are generally on the go and are likely to get into your vehicle, make your trip and put it down straight away without taking the time to do an occasional check-up. It is therefore crucial to take some time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Citroen Xsara, but you didn’t detect it. Here are the two simple ways to verify if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Citroen Xsara, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By paying attention to the sound of your turn signals. In fact, there is an audible warning on each car that alerts you of a rear turn signal bulb burnt out on your Citroen Xsara, you will notice that the time between each “click” is much shorter, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to replace, like the one of your low beam Citroen Xsara or your position lights on Citroen Xsara, don’t be reluctant to consult our publications to help you to realize this replacing.
Changing the rear turn signal bulb on my Citroen Xsara
Now let’s go to the most instersting part of this article, how to replace the rear turn signal bulb on Citroen Xsara? Please note that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Citroen Xsara, see our specific content page. On the other hand, here are the full description to adhere to in order to do this work accurately:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Citroen Xsara. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working in the right way
.
If perhaps you have any additional questions about the Citroen Xsara, do not hesitate to consult our Citroen Xsara category.
