Whether for your own safety, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always functioning is necessary. In truth, bulbs are wearing devices that will obviously burn out with time and as a result need to be swapped out. You’re likely on this website because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Citroen Berlingo 2, we’ve put into writing this article to help you do it all on your own without having to go to your repair shop. To begin , we will take a look at the checking a burnt-out rear turn signal bulb on your Citroen Berlingo 2 and in a second part, how to replace the rear turn signal bulb on your Citroen Berlingo 2.

change-rear-turn-bulb-citroen-berlingo-2

How to find out if the rear turn signal bulb on your Citroen Berlingo 2 is burnt-out or needs to be changed?

When you drive your car you don’t always have the opportunity to check all the safety features of your Citroen Berlingo 2. In truth, you are more often than not on the go and tend to get into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is due to this fact crucial to take the time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Citroen Berlingo 2, but you didn’t perceive it. Here are the two simple techniques to check if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your Citroen Berlingo 2, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functional.
  • By listening to the sound of your turn signals. In actual fact, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Citroen Berlingo 2, you will detect that the time between each “click” is much shorter, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.

You may have another bulb to replace, like the one of your low beam Citroen Berlingo 2 or your position lights on Citroen Berlingo 2, don’t be reluctant to browse our content articles to help you to achieve this replacing.

Changing the rear turn signal bulb on my Citroen Berlingo 2

Now let’s go to the most instersting part of this article content, how to replace the rear turn signal bulb on Citroen Berlingo 2? Please note that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Citroen Berlingo 2, see our specific article. However, here are the detailed description to carry out to be able to complete this work accurately:

  • To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take off the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Replace the rear turn signal bulb on your Citroen Berlingo 2. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning properly

In the event that you have any additional questions about the Citroen Berlingo 2, do not hesitate to consult our Citroen Berlingo 2 category.