No matter if it’s for your own safety, for roadworthiness tests or to prevent a fine, ensuring your turn signal bulbs are all the time functional is extremely important. In actual fact, bulbs are wearing auto parts that will predictably burn out with time and consequently need to be replaced. You’re most probably here because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Chrysler Sebring, we’ve written this post to help you do it by yourself without having to go to your technician. To begin , we will examine inspecting a burnt-out rear turn signal bulb on your Chrysler Sebring and in a second step, how to replace the rear turn signal bulb on your Chrysler Sebring.

change-rear-turn-bulb-chrysler-sebring

How to be sure if the rear turn signal bulb on your Chrysler Sebring is burnt-out or needs to be replaced?

When you drive your vehicle you don’t all the time have the possibility to check all the safety features of your Chrysler Sebring. In actual fact, you are often times in a hurry and are likely to get into your vehicle, make your trip and put it down instantly without taking the time to do an occasional check-up. It is therefore necessary to take the time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chrysler Sebring, but you didn’t identify it. Here are the two simple ways to check if a rear turn signal on your car is out of order or if you need to replace it quickly:

  • When you stop, turn on the ignition on your Chrysler Sebring, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functioning.
  • By paying attention to the sound of your turn signals. In fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Chrysler Sebring, you will recognise that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first technique shown above.

You may have another bulb to replace, like the one of your low beam Chrysler Sebring or your position lights on Chrysler Sebring, don’t be reluctant to read our content articles to help you to realize this replacing.

Replacing the rear turn signal bulb on my Chrysler Sebring

Now let’s go to the most instersting step of this guideline, how to replace the rear turn signal bulb on Chrysler Sebring? You should be aware that this procedure is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chrysler Sebring, see our dedicated content. On the other hand, here are the detailed description to adhere to to be able to perform this act accurately:

  • To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Change the rear turn signal bulb on your Chrysler Sebring. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating effectively

To get more tips on the Chrysler Sebring, take a look at the Chrysler Sebring category.