Whether for your personal safety, for roadworthiness tests or to prevent a fine, making sure your turn signal bulbs are constantly working is fundamental. In reality, bulbs are wearing devices that will predictably burn out after a while and consequently need to be swapped out. You’re most probably on this website because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Chrysler 300, we’ve written this content to help you do it on your own without having to go to your auto technician. In a first step, we will examine examining a burnt-out rear turn signal bulb on your Chrysler 300 and in a second part, how to replace the rear turn signal bulb on your Chrysler 300.

change-rear-turn-bulb-chrysler-300

How to find out if the rear turn signal bulb on your Chrysler 300 is burnt-out or needs to be changed?

When you drive your vehicle you don’t constantly have the occasion to check all the safety features of your Chrysler 300. In reality, you are generally on the go and are likely to get into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result necessary to spend some time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chrysler 300, but you didn’t notice it. Here are the two simple solutions to check if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:

  • When you stop, turn on the ignition on your Chrysler 300, then alternately turn on your left and right rear turn signals and get out of the car to check that they are operational.
  • By listening to the sound of your turn signals. In actual fact, there is an audible warning on each car that alerts you of a rear turn signal bulb burnt out on your Chrysler 300, you will perceive that the time between each “click” is much shorter, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first strategy shown above.

You may have another bulb to replace, like the one of your low beam Chrysler 300 or your position lights on Chrysler 300, don’t hesitate to read our content articles to help you to achieve this replacing.

Replacing the rear turn signal bulb on my Chrysler 300

Now let’s go to the most instersting part of this article, how to replace the rear turn signal bulb on Chrysler 300? You should be aware that this procedure is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chrysler 300, see our dedicated content. However, here are the detailed description to carry out to be able to perform this work accurately:

  • To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Change the rear turn signal bulb on your Chrysler 300. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working in the right way

Whenever you have any additional questions about the Chrysler 300, do not hesitate to consult our Chrysler 300 category.