Whether for your own security, for roadworthiness testing or to prevent a fine, ensuring your turn signal bulbs are always working is very important. In fact, bulbs are wearing parts that will predictably burn out as time passes and therefore need to be swapped out. You’re most probably on this page because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Chrysler 200, we’ve made this content to enable you do it alone without having to go to your technician. To begin , we will take a look at examining a burnt-out rear turn signal bulb on your Chrysler 200 and in a second part, how to replace the rear turn signal bulb on your Chrysler 200.
How do you know if the rear turn signal bulb on your Chrysler 200 is burnt-out or needs to be changed?
When you drive your car you don’t always have the possibility to verify all the security features of your Chrysler 200. In fact, you are often times in a hurry and are likely to get into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is as a result important to take the time to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chrysler 200, but you didn’t detect it. Here are the two ordinary methods to verify if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Chrysler 200, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By paying attention to the sound of your turn signals. In fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Chrysler 200, you will recognize that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to replace, like the one of your low beam Chrysler 200 or your position lights on Chrysler 200, don’t be reluctant to browse our articles to help you to achieve this replacing.
Changing the rear turn signal bulb on my Chrysler 200
Now let’s go to the most important part of this guideline, how to replace the rear turn signal bulb on Chrysler 200? You should be aware that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chrysler 200, see our specific content. Nevertheless, here are the detailed steps to stick to to be able to perform this work correctly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Chrysler 200. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating properly
In the event that you have any additional questions about the Chrysler 200, do not hesitate to consult our Chrysler 200 category.