No matter if it’s for your personal security, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always functioning is fundamental. Surely, bulbs are wearing devices that will surely burn out in the long run and consequently need to be swapped out. You’re probably on this page because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Chevrolet Volt, we’ve written and published this post to help you do it without any help without having to go to your motor mechanic. To begin , we will look at inspecting a burnt-out rear turn signal bulb on your Chevrolet Volt and in a second part, how to replace the rear turn signal bulb on your Chevrolet Volt.
How do you know if the rear turn signal bulb on your Chevrolet Volt is burnt-out or needs to be replaced?
When you drive your automobile you don’t always have the opportunity to check all the security features of your Chevrolet Volt. Surely, you are generally on the go and are likely to get into your automobile, make your trip and put it down straight away without taking the time to do an occasional check-up. It is as a result crucial to spend some time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chevrolet Volt, but you didn’t perceive it. Here are the two ordinary solutions to check if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your Chevrolet Volt, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functional.
- By paying attention to the sound of your turn signals. Indeed, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Chevrolet Volt, you will recognize that the time between each “click” is much closer, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to replace, like the one of your low beam Chevrolet Volt or your position lights on Chevrolet Volt, don’t be reluctant to consult our publications to help you to achieve this substitution.
Changing the rear turn signal bulb on my Chevrolet Volt
Now let’s go to the most instersting part of this content page, how to replace the rear turn signal bulb on Chevrolet Volt? Take note that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chevrolet Volt, see our dedicated content page. On the other hand, here are the detailed description to adhere to to be able to do this work properly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Chevrolet Volt. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning correctly
.
If perhaps you have any additional questions about the Chevrolet Volt, do not hesitate to consult our Chevrolet Volt category.
