No matter if it’s for your own security, for roadworthiness evaluation or to avoid a fine, being sure your turn signal bulbs are always functioning is critical. Obviously, bulbs are wearing parts that will obviously burn out after a while and consequently need to be replaced. You’re almost certainly in this article because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Chevrolet Traverse, we’ve made this article to teach you do it without any help without having to go to your auto mechanic. In a first step, we will examine examining a burnt-out rear turn signal bulb on your Chevrolet Traverse and in a second step, how to change the rear turn signal bulb on your Chevrolet Traverse.

change-rear-turn-bulb-chevrolet-traverse

How do you know if the rear turn signal bulb on your Chevrolet Traverse is burnt-out or needs to be replaced?

When you drive your automobile you don’t always have the possibility to examine all the security features of your Chevrolet Traverse. Obviously, you are quite often in a rush and tend to get into your automobile, make your trip and put it down immediately without taking the time to do an occasional check-up. It is therefore crucial to make the effort to in some instances examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chevrolet Traverse, but you didn’t notice it. Here are the two basic solutions to examine if a rear turn signal on your car is out of order or if you need to change it fairly quickly:

  • When you stop, turn on the ignition on your Chevrolet Traverse, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
  • By listening to the sound of your turn signals. In fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Chevrolet Traverse, you will recognize that the time between each “click” is much closer, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first technique shown above.

You may have another bulb to change, like the one of your low beam Chevrolet Traverse or your position lights on Chevrolet Traverse, don’t hesitate to read our content articles to help you to achieve this replacement.

Changing the rear turn signal bulb on my Chevrolet Traverse

Now let’s go to the most important step of this guideline, how to change the rear turn signal bulb on Chevrolet Traverse? Please be aware that this technique is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chevrolet Traverse, see our specific guideline. However, here are the detailed steps to stick to in order to do this process accurately:

  • To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Change the rear turn signal bulb on your Chevrolet Traverse. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is working effectively

If you wish more tutorials on the Chevrolet Traverse, go to our Chevrolet Traverse category.