No matter if it’s for your personal safety, for roadworthiness tests or to prevent a fine, being sure your turn signal bulbs are constantly functional is extremely important. Surely, bulbs are wearing parts that will obviously burn out with time and therefore need to be replaced. You’re most likely in this article because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Chevrolet Suburban, we’ve posted this post to enable you do it by yourself without having to go to your auto technician. To begin , we will examine inspecting a burnt-out rear turn signal bulb on your Chevrolet Suburban and in a second step, how to change the rear turn signal bulb on your Chevrolet Suburban.
How to find out if the rear turn signal bulb on your Chevrolet Suburban is burnt-out or needs to be replaced?
When you drive your vehicle you don’t constantly have the occasion to check all the safety features of your Chevrolet Suburban. Surely, you are more often than not in a hurry and are likely to get into your vehicle, make your trip and put it down straight away without taking the time to do an occasional check-up. It is due to this fact crucial to take the time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chevrolet Suburban, but you didn’t notice it. Here are the two ordinary solutions to check if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Chevrolet Suburban, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functional.
- By listening to the sound of your turn signals. Indeed, there is an audible indicator on each car that informs you of a rear turn signal bulb burnt out on your Chevrolet Suburban, you will realize that the time between each “click” is much closer, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to change, like the one of your low beam Chevrolet Suburban or your position lights on Chevrolet Suburban, don’t hesitate to read our articles to help you to do this substitution.
Changing the rear turn signal bulb on my Chevrolet Suburban
Now let’s go to the most important step of this guideline, how to change the rear turn signal bulb on Chevrolet Suburban? Please note that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chevrolet Suburban, see our dedicated content. On the other hand, here are the detailed steps to carry out to be able to complete this act properly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Chevrolet Suburban. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working effectively
.
In the event that you have any further questions about the Chevrolet Suburban, do not hesitate to consult our Chevrolet Suburban category.
