No matter if it’s for your personal safety, for roadworthiness tests or to prevent a fine, being certain your turn signal bulbs are always functioning is critical. Obviously, bulbs are wearing devices that will predictably burn out in the long run and as a result need to be replaced. You’re likely here because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Chevrolet Equinox, we’ve written and published this post to enable you do it without any help without having to go to your auto mechanic. To begin , we will examine inspecting a burnt-out rear turn signal bulb on your Chevrolet Equinox and in a second step, how to change the rear turn signal bulb on your Chevrolet Equinox.
How to be sure if the rear turn signal bulb on your Chevrolet Equinox is burnt-out or needs to be replaced?
When you drive your car you don’t always have the opportunity to check all the safety features of your Chevrolet Equinox. Obviously, you are generally in a rush and tend to get into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is therefore necessary to take the time to in some instances check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chevrolet Equinox, but you didn’t detect it. Here are the two simple ways to check if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Chevrolet Equinox, then alternately turn on your left and right rear turn signals and get out of the car to check that they are operational.
- By paying attention to the sound of your turn signals. In fact, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Chevrolet Equinox, you will notice that the time between each “click” is much closer, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Chevrolet Equinox or your position lights on Chevrolet Equinox, don’t be reluctant to have a look at our articles to help you to realize this replacing.
Changing the rear turn signal bulb on my Chevrolet Equinox
Now let’s go to the most instersting step of this guideline, how to change the rear turn signal bulb on Chevrolet Equinox? Please be aware that this operation is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chevrolet Equinox, see our dedicated content page. Nevertheless, here are the detailed steps to stick to to be able to conduct this work accurately:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Chevrolet Equinox. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating in the right way
.
If you have any additional questions about the Chevrolet Equinox, do not hesitate to consult our Chevrolet Equinox category.
