No matter if it’s for your own safety, for roadworthiness testing or to prevent a fine, being certain your turn signal bulbs are all the time functional is necessary. In reality, bulbs are wearing parts that will predictably burn out over time and as a result need to be replaced. You’re most likely in this article because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Chevrolet Cruze, we’ve put into writing this article to help you do it alone without having to go to your auto mechanic. To begin , we will check out the checking a burnt-out rear turn signal bulb on your Chevrolet Cruze and in a second part, how to change the rear turn signal bulb on your Chevrolet Cruze.
How to be sure if the rear turn signal bulb on your Chevrolet Cruze is burnt-out or needs to be changed?
When you drive your vehicle you don’t all the time have the possibility to check all the safety features of your Chevrolet Cruze. In reality, you are often in a rush and tend to get into your vehicle, make your trip and put it down right away without taking the time to do an occasional check-up. It is due to this fact essential to spend some time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chevrolet Cruze, but you didn’t notice it. Here are the two simple techniques to check if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Chevrolet Cruze, then alternately turn on your left and right rear turn signals and get out of the car to check that they are efficient.
- By paying attention to the sound of your turn signals. Indeed, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Chevrolet Cruze, you will recognise that the time between each “click” is much closer, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to change, like the one of your low beam Chevrolet Cruze or your position lights on Chevrolet Cruze, don’t hesitate to consult our publications to help you to do this substitution.
Changing the rear turn signal bulb on my Chevrolet Cruze
Now let’s go to the most instersting part of this article content, how to change the rear turn signal bulb on Chevrolet Cruze? Please be aware that this operation is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chevrolet Cruze, see our specific article. On the other hand, here are the detailed steps to follow in order to complete this act correctly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Chevrolet Cruze. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning in the right way
.
If you have any additional questions about the Chevrolet Cruze, do not hesitate to consult our Chevrolet Cruze category.
