No matter if it’s for your personal safety, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are constantly functioning is critical. In fact, bulbs are wearing auto parts that will surely burn out over time and as a result need to be replaced. You’re most likely here because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you BMW X6, we’ve put into writing this article to enable you do it all on your own without having to go to your mechanic. In a first step, we will have a look at the checking a burnt-out rear turn signal bulb on your BMW X6 and in a second step, how to replace the rear turn signal bulb on your BMW X6.
How do you know if the rear turn signal bulb on your BMW X6 is burnt-out or needs to be changed?
When you drive your car you don’t constantly have the opportunity to check all the safety features of your BMW X6. In fact, you are often on the go and tend to get into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is due to this fact fundamental to take some time to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your BMW X6, but you didn’t identify it. Here are the two ordinary methods to check if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your BMW X6, then alternately turn on your left and right rear turn signals and get out of the car to check that they are working.
- By paying attention to the sound of your turn signals. In truth, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your BMW X6, you will recognise that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to replace, like the one of your low beam BMW X6 or your position lights on BMW X6, don’t hesitate to consult our content articles to help you to complete this replacing.
Replacing the rear turn signal bulb on my BMW X6
Now let’s go to the most important step of this article content, how to replace the rear turn signal bulb on BMW X6? Take note that this procedure is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your BMW X6, see our specific content. However, here are the detailed description to adhere to to be able to perform this process correctly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your BMW X6. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working properly
.
If perhaps you have any further questions about the BMW X6, do not hesitate to consult our BMW X6 category.
