No matter if it’s for your personal safety, for roadworthiness evaluation or to prevent a fine, being certain your turn signal bulbs are all the time working is fundamental. In actual fact, bulbs are wearing parts that will inevitably burn out with time and therefore need to be replaced. You’re likely in this article because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you BMW X3, we’ve put into writing this post to teach you do it on your own without having to go to your technician. To begin , we will look at inspecting a burnt-out rear turn signal bulb on your BMW X3 and in a second part, how to change the rear turn signal bulb on your BMW X3.
How do you know if the rear turn signal bulb on your BMW X3 is burnt-out or needs to be changed?
When you drive your vehicle you don’t all the time have the possibility to check all the safety features of your BMW X3. In actual fact, you are often times in a hurry and are likely to get into your vehicle, make your trip and put it down instantly without taking the time to do an occasional check-up. It is due to this fact fundamental to take the time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your BMW X3, but you didn’t detect it. Here are the two basic ways to check if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your BMW X3, then alternately turn on your left and right rear turn signals and get out of the car to check that they are working.
- By listening to the sound of your turn signals. In truth, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your BMW X3, you will perceive that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to change, like the one of your low beam BMW X3 or your position lights on BMW X3, don’t hesitate to browse our content articles to help you to complete this replacing.
Changing the rear turn signal bulb on my BMW X3
Now let’s go to the most important part of this article, how to change the rear turn signal bulb on BMW X3? Take note that this procedure is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your BMW X3, see our dedicated article content. Nevertheless, here are the full description to stick to in order to perform this work correctly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your BMW X3. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating correctly
.
If you need more tutorials on the BMW X3, go to our BMW X3 category.
