Whether for your own safety, for roadworthiness evaluation or to prevent a fine, being certain your turn signal bulbs are constantly functioning is imperative. In fact, bulbs are wearing parts that will inevitably burn out over time and as a result need to be replaced. You’re most likely on this page because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you BMW X1, we’ve created this article to enable you do it on your own without having to go to your repair shop. In a first step, we will examine examining a burnt-out rear turn signal bulb on your BMW X1 and in a second step, how to change the rear turn signal bulb on your BMW X1.
How do you know if the rear turn signal bulb on your BMW X1 is burnt-out or needs to be changed?
When you drive your car you don’t constantly have the occasion to verify all the safety features of your BMW X1. In fact, you are often on the go and tend to get into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is due to this fact essential to make the effort to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your BMW X1, but you didn’t notice it. Here are the two basic methods to verify if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your BMW X1, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By paying attention to the sound of your turn signals. In actual fact, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your BMW X1, you will recognize that the time between each “click” is much closer, this means that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam BMW X1 or your position lights on BMW X1, don’t hesitate to browse our web content to help you to achieve this replacing.
Changing the rear turn signal bulb on my BMW X1
Now let’s go to the most important step of this guideline, how to change the rear turn signal bulb on BMW X1? Please be aware that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your BMW X1, see our specific content. However, here are the full description to adhere to to be able to carry out this process correctly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your BMW X1. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working in the right way
.
To discover more tips on the BMW X1, take a look at the BMW X1 category.
