Whether for your personal safety, for roadworthiness testing or to prevent a fine, being certain your turn signal bulbs are always functioning is imperative. In truth, bulbs are wearing parts that will predictably burn out over time and consequently need to be replaced. You’re certainly in this article because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Bmw 1 series, we’ve written and published this article to teach you do it all on your own without having to go to your auto mechanic. To begin , we will have a look at the checking a burnt-out rear turn signal bulb on your Bmw 1 series and in a second part, how to replace the rear turn signal bulb on your Bmw 1 series.
How to be sure if the rear turn signal bulb on your Bmw 1 series is burnt-out or needs to be changed?
When you drive your car you don’t always have the occasion to check all the safety features of your Bmw 1 series. In truth, you are often in a rush and are likely to get into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is due to this fact essential to take a little time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Bmw 1 series, but you didn’t perceive it. Here are the two simple techniques to check if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Bmw 1 series, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functional.
- By paying attention to the sound of your turn signals. In truth, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Bmw 1 series, you will perceive that the time between each “click” is much shorter, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to replace, like the one of your low beam Bmw 1 series or your position lights on Bmw 1 series, don’t hesitate to consult our web content to help you to realize this replacing.
Changing the rear turn signal bulb on my Bmw 1 series
Now let’s go to the most instersting part of this guideline, how to replace the rear turn signal bulb on Bmw 1 series? Please be aware that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Bmw 1 series, see our specific content page. Nevertheless, here are the full description to stick to in order to accomplish this process accurately:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Bmw 1 series. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating properly
.
To get more tips on the Bmw 1 series, take a look at the Bmw 1 series category.
