No matter if it’s for your own safety, for roadworthiness evaluation or to avoid a fine, being sure your turn signal bulbs are always functional is fundamental. Indeed, bulbs are wearing devices that will predictably burn out over time and consequently need to be replaced. You’re most probably here because one of your rear turn signals is burnt out and you’re attempting to find how to change the bulb of a rear turn signal on you Audi Q8, we’ve created this article to teach you do it on your own without having to go to your auto technician. To begin , we will have a look at the checking a burnt-out rear turn signal bulb on your Audi Q8 and in a second part, how to replace the rear turn signal bulb on your Audi Q8.
How do you know if the rear turn signal bulb on your Audi Q8 is burnt-out or needs to be changed?
When you drive your vehicle you don’t always have the occasion to check all the safety features of your Audi Q8. Indeed, you are often times in a hurry and are likely to get into your vehicle, make your journey and put it down straight away without taking the time to do an occasional check-up. It is due to this fact crucial to spend some time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Audi Q8, but you didn’t notice it. Here are the two ordinary solutions to check if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Audi Q8, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functional.
- By paying attention to the sound of your turn signals. In fact, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Audi Q8, you will detect that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to replace, like the one of your low beam Audi Q8 or your position lights on Audi Q8, don’t hesitate to browse our content articles to help you to do this replacement.
Changing the rear turn signal bulb on my Audi Q8
Now let’s go to the most important part of this article, how to replace the rear turn signal bulb on Audi Q8? You should be aware that this method is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Audi Q8, see our specific content. Nevertheless, here are the full description to carry out in order to carry out this act accurately:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Audi Q8. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working properly
.
If you need more tutorials on the Audi Q8, go to our Audi Q8 category.
