Whether for your own safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always working is imperative. Surely, bulbs are wearing devices that will predictably burn out after a while and consequently need to be swapped out. You’re probably on this website because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Audi Q7, we’ve written and published this content to help you do it by yourself without having to go to your auto mechanic. In a first step, we will take a look at examining a burnt-out rear turn signal bulb on your Audi Q7 and in a second part, how to replace the rear turn signal bulb on your Audi Q7.
How do you know if the rear turn signal bulb on your Audi Q7 is burnt-out or needs to be changed?
When you drive your vehicle you don’t always have the possibility to check all the safety features of your Audi Q7. Surely, you are often in a rush and are likely to get into your vehicle, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore important to take the time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Audi Q7, but you didn’t detect it. Here are the two ordinary techniques to check if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your Audi Q7, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functioning.
- By listening to the sound of your turn signals. In actual fact, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Audi Q7, you will perceive that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to replace, like the one of your low beam Audi Q7 or your position lights on Audi Q7, don’t hesitate to browse our publications to help you to realize this replacing.
Replacing the rear turn signal bulb on my Audi Q7
Now let’s go to the most instersting part of this guideline, how to replace the rear turn signal bulb on Audi Q7? You should be aware that this method is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Audi Q7, see our specific article. Nevertheless, here are the detailed description to adhere to to be able to perform this process correctly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Audi Q7. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating correctly
.
To get more tips on the Audi Q7, take a look at the Audi Q7 category.
