No matter if it’s for your own security, for roadworthiness tests or to avoid a fine, ensuring your turn signal bulbs are constantly functional is extremely important. In fact, bulbs are wearing parts that will inevitably burn out in the long run and consequently need to be swapped out. You’re most probably on this website because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Alfa Romeo Giulia, we’ve written and published this article to enable you do it on your own without having to go to your auto technician. In a first step, we will look at the checking a burnt-out rear turn signal bulb on your Alfa Romeo Giulia and in a second part, how to change the rear turn signal bulb on your Alfa Romeo Giulia.

change-rear-turn-bulb-alfa-romeo-giulia

How to be sure if the rear turn signal bulb on your Alfa Romeo Giulia is burnt-out or needs to be replaced?

When you drive your automobile you don’t constantly have the opportunity to verify all the security features of your Alfa Romeo Giulia. In fact, you are more often than not on the go and are likely to get into your automobile, make your journey and put it down immediately without taking the time to do an occasional check-up. It is therefore essential to spend some time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Alfa Romeo Giulia, but you didn’t detect it. Here are the two simple techniques to verify if a rear turn signal on your car is out of order or if you need to change it quickly:

  • When you stop, turn on the ignition on your Alfa Romeo Giulia, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functional.
  • By paying attention to the sound of your turn signals. In fact, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Alfa Romeo Giulia, you will recognize that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first procedure shown above.

You may have another bulb to change, like the one of your low beam Alfa Romeo Giulia or your position lights on Alfa Romeo Giulia, don’t hesitate to have a look at our web content to help you to do this replacing.

Changing the rear turn signal bulb on my Alfa Romeo Giulia

Now let’s go to the most important part of this guideline, how to change the rear turn signal bulb on Alfa Romeo Giulia? Please be aware that this technique is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Alfa Romeo Giulia, see our specific article. Nevertheless, here are the detailed description to carry out in order to perform this act accurately:

  • To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Change the rear turn signal bulb on your Alfa Romeo Giulia. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working in the right way

To discover more tips on the Alfa Romeo Giulia, take a look at the Alfa Romeo Giulia category.