Whether for your own safety, for roadworthiness tests or to avoid a fine, making sure your turn signal bulbs are always functional is very important. In fact, bulbs are wearing devices that will surely burn out with time and therefore need to be replaced. You’re likely in this article because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Acura TSX, we’ve created this article to enable you do it on your own without having to go to your repair shop. To begin , we will check out examining a burnt-out rear turn signal bulb on your Acura TSX and in a second part, how to change the rear turn signal bulb on your Acura TSX.
How do you know if the rear turn signal bulb on your Acura TSX is burnt-out or needs to be changed?
When you drive your automobile you don’t always have the possibility to check all the safety features of your Acura TSX. In fact, you are generally in a hurry and are likely to get into your automobile, make your journey and put it down immediately without taking the time to do an occasional check-up. It is due to this fact necessary to make the effort to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Acura TSX, but you didn’t become aware of it. Here are the two simple methods to check if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Acura TSX, then alternately turn on your left and right rear turn signals and get out of the car to check that they are efficient.
- By paying attention to the sound of your turn signals. In fact, there is an audible warning on each car that alerts you of a rear turn signal bulb burnt out on your Acura TSX, you will realize that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Acura TSX or your position lights on Acura TSX, don’t be reluctant to consult our publications to help you to achieve this replacement.
Changing the rear turn signal bulb on my Acura TSX
Now let’s go to the most important part of this content page, how to change the rear turn signal bulb on Acura TSX? Take note that this method is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Acura TSX, see our dedicated content. On the other hand, here are the full description to stick to to be able to carry out this work correctly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Acura TSX. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working correctly
.
If you need more guides on the Acura TSX, go to our Acura TSX category.
