Whether for your personal security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are all the time working is very important. In reality, bulbs are wearing auto parts that will obviously burn out after a while and therefore need to be replaced. You’re probably on this page because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Acura RDX, we’ve written this article to teach you do it by yourself without having to go to your motor mechanic. In a first step, we will examine inspecting a burnt-out rear turn signal bulb on your Acura RDX and in a second part, how to replace the rear turn signal bulb on your Acura RDX.

change-rear-turn-bulb-acura-rdx

How do you know if the rear turn signal bulb on your Acura RDX is burnt-out or needs to be replaced?

When you drive your car you don’t all the time have the opportunity to check all the security features of your Acura RDX. In reality, you are often times on the go and are likely to get into your car, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore essential to take some time to on occasions check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Acura RDX, but you didn’t become aware of it. Here are the two simple methods to check if a rear turn signal on your car is out of order or if you need to replace it quickly:

  • When you stop, turn on the ignition on your Acura RDX, then alternately turn on your left and right rear turn signals and get out of the car to check that they are efficient.
  • By paying attention to the sound of your turn signals. In actual fact, there is an audible warning on each car that informs you of a rear turn signal bulb burnt out on your Acura RDX, you will notice that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first technique shown above.

You may have another bulb to replace, like the one of your low beam Acura RDX or your position lights on Acura RDX, don’t hesitate to read our publications to help you to complete this replacement.

Changing the rear turn signal bulb on my Acura RDX

Now let’s go to the most instersting part of this article, how to replace the rear turn signal bulb on Acura RDX? Please note that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Acura RDX, see our specific article. However, here are the full description to stick to in order to execute this act properly:

  • To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take out the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Replace the rear turn signal bulb on your Acura RDX. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working in the right way

If perhaps you have any additional questions about the Acura RDX, do not hesitate to consult our Acura RDX category.