Regardless it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are constantly working is very important. In fact, bulbs are wearing parts that will undoubtedly burn out over time and consequently need to be changed. You’re likely on this site because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Volkswagen Polo 3 parking light, we’ve posted this content page to help you do this operation without any help and not need to go to your auto mechanic. In a first part, we will look into replacing the front daytime running light bulb of your motor vehicle and in a second art, how to change the rear daytime running light.

change-parking-light-volkswagen-polo-3

How to change the front parking light bulb of my Volkswagen Polo 3?

We will commence this content with exchanging the front daytime running light bulb of your Volkswagen Polo 3, bear in mind that depending on the year and finish of your motor vehicle it may not be quite the same solution to use. In fact, even if the location of your bulb is not going to change, the access may be more or less difficult based on the features of your car.

First solution, we will accomplish the bulb swap of your daytime running light without taking out the headlight of your Volkswagen Polo 3. Although this technique is the easiest, it is not assured that you will be able to perform it on your vehicle without encumbrance. In fact, based on the options and the year, on some versions there will not be enough space for you to change the bulb using this method. Here are the two different techniques to change the bulb of the front parking light of your Volkswagen Polo 3:.

  • Going through the bonnet of your car: First solution, you will only go through the bonnet of your vehicle to access your headlight unit. This is the most wise approach but it is not always easy to realise, sometimes because of secondary parts that will block your access. To perform this, here are the guidelines to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this step has been completed, you will need to access the back of your headlight unit to change the daytime running light bulb on your Volkswagen Polo 3. You may possibly need to remove the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to remove the bulb socket from its position. To perform this, pull carefully on the socket and not on the wires (you risk damaging them), finally once the socket is out, you can change your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once done, reassemble the set up, reconnect your battery and accomplish a check test before taking to the road.
  • By taking out the crosshair grill and the headlight:
  • Second option, you can remove the headlight of your Volkswagen Polo 3 in the event that the access through the engine block seems too obstructed. To do this, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these actions are achieved you will simply have to follow the same methodology as on the previous section to change the front daytime running light bulb of your Volkswagen Polo 3

.

How to change the rear parking light bulb on your Volkswagen Polo 3

To conclude, if you need to change the rear parking light bulb of your Volkswagen Polo 3 the technique is much simpler, here are the different guidelines to follow to allow you to change this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Insert your new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Check that your parking lights are functioning properly again before you set off again and you’re done. If you want to change the fog light bulb on your Volkswagen Polo 3, please go through our dedicated content page to learn how to do it.

If you need more guides on the Volkswagen Polo 3, go to our Volkswagen Polo 3 category.