Whether it’s for your own safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are constantly operational is important and vital. In reality, bulbs are wearing parts that will inevitably burn out with time and as a result need to be swapped out. You’re probably on this website because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Toyota Tacoma parking light, we’ve created this article to help you do this action by yourself and not need to go to your repair shop. In a first part, we will look at changing the front daytime running light bulb of your motor vehicle and in a second section, how to swap the rear daytime running light.

change-parking-light-toyota-tacoma

How to swap the front parking light bulb of my Toyota Tacoma?

We will commence this article content with swapping the front daytime running light bulb of your Toyota Tacoma, be aware that depending on the year and finish of your motor vehicle it may not be quite the same method to use. In reality, whether or not the position of your bulb is not going to change, the access may be more or less problematic based on the features of your car.

First method, we will perform the bulb swap of your daytime running light without removing the headlight of your Toyota Tacoma. Although this method is the simplest, it is not assured that you will be in a position to execute it on your car without trouble. In reality, based on the versions and the year, on some versions there will not be enough space for you to swap the bulb by doing this. Here are the two distinct methods to swap the bulb of the front parking light of your Toyota Tacoma:.

  • Going through the bonnet of your car: First approach, you will simply go through the bonnet of your car to direct access your headlight unit. This is the most rational process but it is not always easy to realise, often because of secondary auto parts that will block your access. To do this, here are the steps to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this step has been accomplished, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Toyota Tacoma. You might need to remove the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ generally does the job), then you will need to remove the bulb socket from its location. To do this, pull delicately on the socket and not on the wires (you risk damaging them), at last when the socket is out, you can swap your parking lamps bulb, being very careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once completed, reassemble the set up, reconnect your battery and perform a check test before taking to the road.
  • By removing the crosshair grill and the headlight:
  • Second alternative, you can remove the headlight of your Toyota Tacoma if it turns out the access through the engine block seems too complicated. To do so, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these actions are done you will just have to follow the same method as on the previous part to swap the front daytime running light bulb of your Toyota Tacoma

.

How to swap the rear parking light bulb on your Toyota Tacoma

To finish , if you desire to change the rear parking light bulb of your Toyota Tacoma the technique is less difficult, here are the different basic steps to follow to allow you to change this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Put in your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Verify that your parking lights are functioning correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Toyota Tacoma, please browse our dedicated content page to find out how to do it.

To discover more tips on the Toyota Tacoma, take a look at the Toyota Tacoma category.