Whether it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly operational is extremely important. Indeed, bulbs are wearing parts that will undoubtedly burn out after some time and as a consequence need to be swapped out. You’re most likely on this website because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Toyota Land Cruiser Serie 150 parking light, we’ve created this article content to help you do this process without hiring somebody and not need to go to your auto mechanic. In a first part, we will take a look at changing the front daytime running light bulb of your motor vehicle and in a second step, how to swap the rear daytime running light.

change-parking-light-toyota-land-cruiser-serie-150

How to swap the front parking light bulb of my Toyota Land Cruiser Serie 150?

We will commence this content with changing the front daytime running light bulb of your Toyota Land Cruiser Serie 150, be aware that depending on the year and finish of your motor vehicle it may not be quite the same method to use. Indeed, regardless if the position of your bulb is not going to change, the access may be more or less problematic based on the features of your car.

First method, we will perform the bulb swap of your daytime running light without getting rid of the headlight of your Toyota Land Cruiser Serie 150. Although this method is the most simple, it is not assured that you will be able to do it on your car without encumbrance. Indeed, dependant on the options and the year, on some versions there will not be enough space for you to swap the bulb in this way. Here are the two distinct techniques to swap the bulb of the front parking light of your Toyota Land Cruiser Serie 150:.

  • Going through the bonnet of your car: First strategy, you will simply go through the bonnet of your car to direct access your headlight unit. This is the most wise process but it is not always easy to accomplish, often because of secondary auto parts that will obstruct your access. To do this, here are the guidelines to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this stage has been completed, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Toyota Land Cruiser Serie 150. You may need to take off the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to take off the bulb socket from its position. To do this, pull delicately on the socket and not on the wires (you risk damaging them), at last now that the socket is out, you can swap your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once done, reassemble the system, reconnect your battery and execute a check test before taking to the road.
  • By getting rid of the crosshair grill and the headlight:
  • Second alternative, you can remove the headlight of your Toyota Land Cruiser Serie 150 in cases where the access through the engine block seems too complicated. To accomplish this, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these steps are completed you will just have to stick to the same technique as on the previous section to swap the front daytime running light bulb of your Toyota Land Cruiser Serie 150

.

How to swap the rear parking light bulb on your Toyota Land Cruiser Serie 150

To finish , if you wish to change the rear parking light bulb of your Toyota Land Cruiser Serie 150 the approach is much easier, here are the different guidelines to stick to to allow you to change this bulb:

  • Unplug your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Place your new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Check that your parking lights are working properly again before you set off again and you’re done. If you want to change the fog light bulb on your Toyota Land Cruiser Serie 150, please read our dedicated article to learn how to do it.

If you have any further questions about the Toyota Land Cruiser Serie 150, do not hesitate to consult our Toyota Land Cruiser Serie 150 category.