Regardless it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are always operational is quite important. In fact, bulbs are wearing parts that will obviously burn out over time and as a consequence need to be replaced. You’re likely on this website because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Toyota Land Cruiser Serie 120 parking light, we’ve made this article to help you do this action on your own and not need to go to your motor mechanic. In a first step, we will look at replacing the front daytime running light bulb of your car and in a second art, how to swap the rear daytime running light.

change-parking-light-toyota-land-cruiser-serie-120

How to swap the front parking light bulb of my Toyota Land Cruiser Serie 120?

We will start this document with changing the front daytime running light bulb of your Toyota Land Cruiser Serie 120, bear in mind that according to the year and finish of your car it may not be quite the same methodology to use. In fact, whether or not the location of your bulb is not going to change, the access may be more or less complicated depending on the features of your car.

First methodology, we will perform the bulb change of your daytime running light without removing the headlight of your Toyota Land Cruiser Serie 120. Although this approach is the simplest, it is not assured that you will be in a position to perform it on your automobile without encumbrance. In fact, dependant on the versions and the year, on some versions there will not be enough space for you to swap the bulb in this manner. Here are the two different solutions to swap the bulb of the front parking light of your Toyota Land Cruiser Serie 120:.

  • Going through the bonnet of your car: First technique, you will simply go through the bonnet of your automobile to direct access your headlight unit. This is the most logical process but it is not always easy to realise, generally because of secondary auto parts that will obstruct your access. To do this, here are the guidelines to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been completed, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Toyota Land Cruiser Serie 120. You may need to take off the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to take off the bulb socket from its area. To do this, pull carefully on the socket and not on the wires (you risk damaging them), at last now that the socket is out, you can swap your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once done, reassemble the set up, reconnect your battery and carry out a check test before taking to the road.
  • By removing the crosshair grill and the headlight:
  • Second solution, you can remove the headlight of your Toyota Land Cruiser Serie 120 in cases where the access through the engine block seems too obstructed. To do this, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these steps are achieved you will only have to follow the same method as on the previous part to swap the front daytime running light bulb of your Toyota Land Cruiser Serie 120

.

How to swap the rear parking light bulb on your Toyota Land Cruiser Serie 120

To conclude, if you want to replace the rear parking light bulb of your Toyota Land Cruiser Serie 120 the methodology is less difficult, here are the different steps to follow to allow you to replace this bulb:

  • Unplug your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Place your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Examine that your parking lights are operating properly again before you set off again and you’re done. If you want to change the fog light bulb on your Toyota Land Cruiser Serie 120, please read our specific document to find out how to do it.

If you wish more tutorials on the Toyota Land Cruiser Serie 120, go to our Toyota Land Cruiser Serie 120 category.