It doesn’t matter if it’s for your own safety, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are constantly operational is necessary. In fact, bulbs are wearing parts that will definitely burn out over time and as a result need to be swapped out. You’re likely here because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Subaru Legacy parking light, we’ve posted this content to help you do this operation on your own and not need to go to your mechanic. In a first step, we will take a look at replacing the front daytime running light bulb of your car and in a second section, how to change the rear daytime running light.
How to change the front parking light bulb of my Subaru Legacy?
We will begin this content with swapping the front daytime running light bulb of your Subaru Legacy, bear in mind that according to the year and finish of your car it may not be quite the same approach to use. In fact, even if the position of your bulb is not going to change, the access may be more or less complicated based on the features of your car.
First approach, we will conduct the bulb swap of your daytime running light without getting rid of the headlight of your Subaru Legacy. Although this approach is the most simple, it is not assured that you will be in a position to accomplish it on your motor vehicle without trouble. In fact, based on the options and the year, on some versions there will not be enough space for you to change the bulb in this way. Here are the two distinct ways to change the bulb of the front parking light of your Subaru Legacy:.
- Going through the bonnet of your car: First strategy, you will simply go through the bonnet of your motor vehicle to direct access your headlight unit. This is the most wise technique but it is not always easy to do to achieve, sometimes because of secondary auto parts that will obstruct your access. To achieve this, here are the guidelines to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been finished, you will need to access the back of your headlight unit to change the daytime running light bulb on your Subaru Legacy. You may need to take out the battery for easier access. In this instance, you will need to open the bulb protection cap on your headlight (¼ generally does the job), then you will need to take out the bulb socket from its area. To achieve this, pull delicately on the socket and not on the wires (you risk damaging them), at last now that the socket is out, you can change your parking lamps bulb, being very careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once carried out, reassemble the assembly, reconnect your battery and perform a check test before taking to the road.
- By getting rid of the crosshair grill and the headlight:
- Second option, you can remove the headlight of your Subaru Legacy in the event that the access through the engine block seems too difficult. To accomplish this, you just have to open your bonnet, take out the front grill held by only a few torx screws, then take out the headlight in question. Once these steps are achieved you will simply have to stick to the same technique as on the previous part to change the front daytime running light bulb of your Subaru Legacy
.
How to change the rear parking light bulb on your Subaru Legacy
Finally, if you need to change the rear parking light bulb of your Subaru Legacy the approach is less difficult, here are the different simple steps to stick to to allow you to change this bulb:
- Unplug your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
- Place your brand-new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Check that your parking lights are working correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Subaru Legacy, please read our dedicated article content to find out how to do it.
If you have any further questions about the Subaru Legacy, do not hesitate to consult our Subaru Legacy category.
