Regardless of it’s for your personal security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are constantly functional is very important. Indeed, bulbs are wearing parts that will obviously burn out with time and therefore need to be changed. You’re likely in this article because one of your position lamp is burnt out and you’re concerned about how to change the bulb of my Peugeot Partner Tepee parking light, we’ve created this article to help you do this operation without any help and not need to go to your auto mechanic. In a first step, we will look at changing the front daytime running light bulb of your car and in a second section, how to change the rear daytime running light.
How to change the front parking light bulb of my Peugeot Partner Tepee?
We will commence this article with exchanging the front daytime running light bulb of your Peugeot Partner Tepee, remember that depending on the year and finish of your car it may not be quite the same methodology to use. Indeed, even if the location of your bulb is not going to change, the access may be more or less complex depending on the features of your car.
First methodology, we will execute the bulb change of your daytime running light without removing the headlight of your Peugeot Partner Tepee. Although this process is the easiest, it is not guaranteed that you will be able to execute it on your vehicle without trouble. Indeed, depending on the versions and the year, on some versions there will not be enough space for you to change the bulb by doing this. Here are the two different solutions to change the bulb of the front parking light of your Peugeot Partner Tepee:.
- Going through the bonnet of your car: First approach, you will only go through the bonnet of your vehicle to direct access your headlight unit. This is the most wise method but it is not always easy to accomplish, generally because of secondary auto parts that will obstruct your access. To perform this, here are the basic steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this stage has been completed, you will need to access the back of your headlight unit to change the daytime running light bulb on your Peugeot Partner Tepee. You may perhaps need to remove the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to remove the bulb socket from its area. To perform this, pull carefully on the socket and not on the wires (you risk damaging them), at last once the socket is out, you can change your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once finished, reassemble the set up, reconnect your battery and perform a check test before taking to the road.
- By removing the crosshair grill and the headlight:
- Second solution, you can remove the headlight of your Peugeot Partner Tepee if the access through the engine block seems too obstructed. To do so, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these actions are completed you will simply have to stick to the same methodology as on the previous part to change the front daytime running light bulb of your Peugeot Partner Tepee
.
How to change the rear parking light bulb on your Peugeot Partner Tepee
Finally, if you desire to swap the rear parking light bulb of your Peugeot Partner Tepee the methodology is much easier, here are the different guidelines to stick to to allow you to swap this bulb:
- Disconnect your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
- Place your brand-new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Check that your parking lights are functioning correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Peugeot Partner Tepee, please browse our dedicated content page to discover how to do it.
Whenever you have any further questions about the Peugeot Partner Tepee, do not hesitate to consult our Peugeot Partner Tepee category.
