It doesn’t matter if it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly working is fundamental. Indeed, bulbs are wearing parts that will surely burn out over time and as a consequence need to be replaced. You’re probably here because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Peugeot e-208 parking light, we’ve written this article content to help you do this operation without any help and not need to go to your motor mechanic. In a first part, we will take a look at swapping the front daytime running light bulb of your motor vehicle and in a second section, how to change the rear daytime running light.

change-parking-light-peugeot-e-208

How to change the front parking light bulb of my Peugeot e-208?

We will start this article content with replacing the front daytime running light bulb of your Peugeot e-208, remember that based on the year and finish of your motor vehicle it may not be quite the same methodology to use. Indeed, whether or not the location of your bulb is not going to change, the access may be more or less challenging depending on the features of your car.

First methodology, we will execute the bulb change of your daytime running light without removing the headlight of your Peugeot e-208. Although this approach is the most basic, it is not guaranteed that you will be in a position to accomplish it on your automobile without encumbrance. Indeed, depending on the versions and the year, on some versions there will not be enough space for you to change the bulb like this. Here are the two distinct methods to change the bulb of the front parking light of your Peugeot e-208:.

  • Going through the bonnet of your car: First strategy, you will only go through the bonnet of your automobile to access your headlight unit. This is the most wise method but it is not always easy to realise, often because of secondary auto parts that will obstruct your access. To perform this, here are the guidelines to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this step has been done, you will need to access the back of your headlight unit to change the daytime running light bulb on your Peugeot e-208. You might need to take off the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to take off the bulb socket from its location. To perform this, pull carefully on the socket and not on the wires (you risk damaging them), at last now that the socket is out, you can change your parking lamps bulb, being very careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once accomplished, reassemble the set up, reconnect your battery and perform a check test before taking to the road.
  • By removing the crosshair grill and the headlight:
  • Second option, you can remove the headlight of your Peugeot e-208 in cases where the access through the engine block seems too obstructed. To do this, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these steps are completed you will only have to follow the same technique as on the previous part to change the front daytime running light bulb of your Peugeot e-208

.

How to change the rear parking light bulb on your Peugeot e-208

To conclude, if you desire to replace the rear parking light bulb of your Peugeot e-208 the methodology is more simple, here are the different simple steps to follow to allow you to replace this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Insert your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Verify that your parking lights are operating properly again before you set off again and you’re done. If you want to change the fog light bulb on your Peugeot e-208, please go through our dedicated content to find out how to do it.

Whenever you have any further questions about the Peugeot e-208, do not hesitate to consult our Peugeot e-208 category.