Whether it’s for your own security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always functional is necessary. Indeed, bulbs are wearing parts that will obviously burn out as time passes and as a consequence need to be changed. You’re likely on this site because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Nissan Pulsar parking light, we’ve created this article to help you do this procedure without help and not need to go to your motor mechanic. In a first step, we will look at replacing the front daytime running light bulb of your car and in a second art, how to replace the rear daytime running light.
How to replace the front parking light bulb of my Nissan Pulsar?
We will commence this article content with changing the front daytime running light bulb of your Nissan Pulsar, remember that based on the year and finish of your car it may not be quite the same method to use. Indeed, regardless if the location of your bulb is not going to change, the access may be more or less complicated depending on the features of your car.
First method, we will accomplish the bulb change of your daytime running light without getting rid of the headlight of your Nissan Pulsar. Although this method is the most basic, it is not assured that you will be in a position to accomplish it on your motor vehicle without encumbrance. Indeed, based on the options and the year, on some versions there will not be enough space for you to replace the bulb that way. Here are the two different ways to replace the bulb of the front parking light of your Nissan Pulsar:.
- Going through the bonnet of your car: First technique, you will only go through the bonnet of your motor vehicle to access your headlight unit. This is the most rational solution but it is not always easy to do to achieve, often because of secondary auto parts that will obstruct your access. To get this done, here are the steps to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been completed, you will need to access the back of your headlight unit to replace the daytime running light bulb on your Nissan Pulsar. You may need to take off the battery for easier access. In this instance, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to take off the bulb socket from its position. To get this done, pull carefully on the socket and not on the wires (you risk damaging them), at last when the socket is out, you can replace your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once accomplished, reassemble the set up, reconnect your battery and accomplish a check test before taking to the road.
- By getting rid of the crosshair grill and the headlight:
- Second option, you can remove the headlight of your Nissan Pulsar in the event that the access through the engine block seems too difficult. To do so, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these steps are done you will only have to stick to the same methodology as on the previous section to replace the front daytime running light bulb of your Nissan Pulsar
.
How to replace the rear parking light bulb on your Nissan Pulsar
To finish , if you want to swap the rear parking light bulb of your Nissan Pulsar the approach is much easier, here are the different simple steps to stick to to allow you to swap this bulb:
- Disconnect your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
- Place your brand-new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Check that your parking lights are operating properly again before you set off again and you’re done. If you want to change the fog light bulb on your Nissan Pulsar, please read our specific content page to discover how to do it.
Whenever you have any further questions about the Nissan Pulsar, do not hesitate to consult our Nissan Pulsar category.
