Regardless whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are constantly operational is pretty important. In reality, bulbs are wearing parts that will obviously burn out as time passes and therefore need to be replaced. You’re likely here because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Mitsubishi Space star 2 parking light, we’ve made this content page to help you do this operation on your own and not need to go to your motor mechanic. In a first step, we will take a look at changing the front daytime running light bulb of your motor vehicle and in a second section, how to replace the rear daytime running light.

change-parking-light-mitsubishi-space-star-2

How to replace the front parking light bulb of my Mitsubishi Space star 2?

We will begin this document with exchanging the front daytime running light bulb of your Mitsubishi Space star 2, remember that according to the year and finish of your motor vehicle it may not be quite the same approach to use. In reality, whether or not the position of your bulb is not going to change, the access may be more or less difficult depending on the features of your car.

First approach, we will perform the bulb change of your daytime running light without removing the headlight of your Mitsubishi Space star 2. Although this technique is the most basic, it is not assured that you will be in a position to perform it on your motor vehicle without trouble. In reality, dependant on the versions and the year, on some versions there will not be enough space for you to replace the bulb using this method. Here are the two different ways to replace the bulb of the front parking light of your Mitsubishi Space star 2:.

  • Going through the bonnet of your car: First technique, you will only go through the bonnet of your motor vehicle to direct access your headlight unit. This is the most rational solution but it is not always easy to do to accomplish, often because of secondary auto parts that will obstruct your access. To perform this, here are the steps to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this step has been finished, you will need to access the back of your headlight unit to replace the daytime running light bulb on your Mitsubishi Space star 2. You may perhaps need to take off the battery for easier access. In this instance, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to take off the bulb socket from its position. To perform this, pull gently on the socket and not on the wires (you risk damaging them), finally once the socket is out, you can replace your parking lamps bulb, being cautious not to damage the wires and use a cloth to avoid dirtying your new bulb. Once finished, reassemble the assembly, reconnect your battery and do a check test before taking to the road.
  • By removing the crosshair grill and the headlight:
  • Second alternative, you can remove the headlight of your Mitsubishi Space star 2 in the event that the access through the engine block seems too challenging. To do so, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these actions are completed you will simply have to stick to the same methodology as on the previous section to replace the front daytime running light bulb of your Mitsubishi Space star 2

.

How to replace the rear parking light bulb on your Mitsubishi Space star 2

Finally, if you desire to swap the rear parking light bulb of your Mitsubishi Space star 2 the process is much easier, here are the different simple steps to stick to to allow you to swap this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Insert your new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Examine that your parking lights are working properly again before you set off again and you’re done. If you want to change the fog light bulb on your Mitsubishi Space star 2, please read our dedicated article to find out how to do it.

In the event that you have any further questions about the Mitsubishi Space star 2, do not hesitate to consult our Mitsubishi Space star 2 category.