Regardless of it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly working is important and vital. In reality, bulbs are wearing parts that will definitely burn out as time passes and consequently need to be swapped out. You’re likely in this article because one of your position lamp is burnt out and you’re concerned about how to change the bulb of my Land Rover Discovery parking light, we’ve posted this content to help you do this procedure without hiring somebody and not need to go to your auto mechanic. In a first part, we will look at changing the front daytime running light bulb of your motor vehicle and in a second step, how to swap the rear daytime running light.

change-parking-light-land-rover-discovery

How to swap the front parking light bulb of my Land Rover Discovery?

We will begin this content with changing the front daytime running light bulb of your Land Rover Discovery, bear in mind that according to the year and finish of your motor vehicle it may not be quite the same method to use. In reality, even if the location of your bulb is not going to change, the access may be more or less difficult depending on the features of your car.

First method, we will conduct the bulb change of your daytime running light without removing the headlight of your Land Rover Discovery. Although this technique is the most simple, it is not guaranteed that you will be able to perform it on your motor vehicle without encumbrance. In reality, based on the versions and the year, on some versions there will not be enough space for you to swap the bulb like this. Here are the two distinct techniques to swap the bulb of the front parking light of your Land Rover Discovery:.

  • Going through the bonnet of your car: First solution, you will only go through the bonnet of your motor vehicle to direct access your headlight unit. This is the most logical method but it is not always easy to do to accomplish, generally because of secondary parts that will obstruct your access. To perform this, here are the simple steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been done, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Land Rover Discovery. You may possibly need to take off the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to take off the bulb socket from its position. To perform this, pull gently on the socket and not on the wires (you risk damaging them), at last when the socket is out, you can swap your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once completed, reassemble the system, reconnect your battery and carry out a check test before taking to the road.
  • By removing the crosshair grill and the headlight:
  • Second alternative, you can remove the headlight of your Land Rover Discovery if the access through the engine block seems too challenging. To do so, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these steps are completed you will only have to stick to the same method as on the previous part to swap the front daytime running light bulb of your Land Rover Discovery

.

How to swap the rear parking light bulb on your Land Rover Discovery

To conclude, if you need to change the rear parking light bulb of your Land Rover Discovery the approach is incredibly easier, here are the different basic steps to stick to to allow you to change this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Put in your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Examine that your parking lights are working properly again before you set off again and you’re done. If you want to change the fog light bulb on your Land Rover Discovery, please read our specific article content to learn how to do it.

To get more tips on the Land Rover Discovery, take a look at the Land Rover Discovery category.