Regardless it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are always working is necessary. In reality, bulbs are wearing parts that will inevitably burn out after some time and consequently need to be swapped out. You’re probably here because one of your position lamp is burnt out and you’re concerned about how to change the bulb of my Jeep Liberty parking light, we’ve created this content to help you do this action without help and not need to go to your motor mechanic. In a first part, we will look into swapping the front daytime running light bulb of your motor vehicle and in a second step, how to swap the rear daytime running light.

change-parking-light-jeep-liberty

How to swap the front parking light bulb of my Jeep Liberty?

We will start this document with swapping the front daytime running light bulb of your Jeep Liberty, be aware that according to the year and finish of your motor vehicle it may not be quite the same technique to use. In reality, regardless if the position of your bulb is not going to change, the access may be more or less problematic based on the features of your car.

First technique, we will perform the bulb swap of your daytime running light without taking out the headlight of your Jeep Liberty. Although this process is the most basic, it is not assured that you will be in a position to perform it on your motor vehicle without encumbrance. In reality, depending on the versions and the year, on some versions there will not be enough space for you to swap the bulb using this method. Here are the two distinct solutions to swap the bulb of the front parking light of your Jeep Liberty:.

  • Going through the bonnet of your car: First approach, you will only go through the bonnet of your motor vehicle to direct access your headlight unit. This is the most wise process but it is not always easy to do to realise, often because of secondary parts that will block your access. To get this done, here are the basic steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this stage has been completed, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Jeep Liberty. You may need to remove the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ generally does the job), then you will need to remove the bulb socket from its location. To get this done, pull delicately on the socket and not on the wires (you risk damaging them), at last now that the socket is out, you can swap your parking lamps bulb, being cautious not to damage the wires and use a cloth to avoid dirtying your new bulb. Once accomplished, reassemble the set up, reconnect your battery and do a check test before taking to the road.
  • By taking out the crosshair grill and the headlight:
  • Second option, you can remove the headlight of your Jeep Liberty if it turns out the access through the engine block seems too difficult. To accomplish this, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these actions are achieved you will just have to stick to the same method as on the previous part to swap the front daytime running light bulb of your Jeep Liberty

.

How to swap the rear parking light bulb on your Jeep Liberty

To finish , if you want to swap the rear parking light bulb of your Jeep Liberty the approach is much easier, here are the different steps to stick to to allow you to swap this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Put in your new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Examine that your parking lights are functioning correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Jeep Liberty, please go through our specific article content to learn how to do it.

To discover more tips on the Jeep Liberty, take a look at the Jeep Liberty category.