Regardless of it’s for your own safety, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are always working is very important. Indeed, bulbs are wearing parts that will definitely burn out with time and as a consequence need to be replaced. You’re most likely on this website because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Jeep Cherokee parking light, we’ve created this article content to help you do this process without any help and not need to go to your auto technician. In a first step, we will look into swapping the front daytime running light bulb of your motor vehicle and in a second art, how to swap the rear daytime running light.
How to swap the front parking light bulb of my Jeep Cherokee?
We will commence this content page with swapping the front daytime running light bulb of your Jeep Cherokee, take note that depending on the year and finish of your motor vehicle it may not be quite the same technique to use. Indeed, whether or not the position of your bulb is not going to change, the access may be more or less challenging based on the features of your car.
First technique, we will execute the bulb change of your daytime running light without getting rid of the headlight of your Jeep Cherokee. Although this method is the most basic, it is not guaranteed that you will be in a position to perform it on your motor vehicle without trouble. Indeed, depending on the versions and the year, on some models there will not be enough space for you to swap the bulb like this. Here are the two different ways to swap the bulb of the front parking light of your Jeep Cherokee:.
- Going through the bonnet of your car: First solution, you will simply go through the bonnet of your motor vehicle to direct access your headlight unit. This is the most logical approach but it is not always easy to do to achieve, often because of secondary auto parts that will obstruct your access. To accomplish this, here are the simple steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this stage has been accomplished, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Jeep Cherokee. You may need to take out the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to take out the bulb socket from its location. To accomplish this, pull carefully on the socket and not on the wires (you risk damaging them), finally when the socket is out, you can swap your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once accomplished, reassemble the assembly, reconnect your battery and perform a check test before taking to the road.
- By getting rid of the crosshair grill and the headlight:
- Second alternative, you can remove the headlight of your Jeep Cherokee in the event that the access through the engine block seems too difficult. To do so, you just have to open your bonnet, take out the front grill held by only a few torx screws, then take out the headlight in question. Once these steps are done you will simply have to follow the same method as on the previous section to swap the front daytime running light bulb of your Jeep Cherokee
.
How to swap the rear parking light bulb on your Jeep Cherokee
Finally, if you want to swap the rear parking light bulb of your Jeep Cherokee the approach is much easier, here are the different guidelines to follow to allow you to swap this bulb:
- Disconnect your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
- Place your brand-new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Examine that your parking lights are functioning correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Jeep Cherokee, please browse our specific document to discover how to do it.
If you need more guides on the Jeep Cherokee, go to our Jeep Cherokee category.
