It doesn’t matter if it’s for your own safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are constantly operational is very important. In reality, bulbs are wearing parts that will undoubtedly burn out over time and therefore need to be changed. You’re most likely on this website because one of your position lamp is burnt out and you’re concerned about how to change the bulb of my Ford Fusion parking light, we’ve posted this content page to help you do this action without hiring somebody and not need to go to your auto technician. In a first part, we will look into replacing the front daytime running light bulb of your motor vehicle and in a second step, how to swap the rear daytime running light.

change-parking-light-ford-fusion

How to swap the front parking light bulb of my Ford Fusion?

We will start this content page with replacing the front daytime running light bulb of your Ford Fusion, take note that according to the year and finish of your motor vehicle it may not be quite the same solution to use. In reality, regardless if the location of your bulb is not going to change, the access may be more or less challenging based on the features of your car.

First solution, we will perform the bulb swap of your daytime running light without taking out the headlight of your Ford Fusion. Although this method is the most simple, it is not assured that you will be in a position to accomplish it on your automobile without trouble. In reality, based on the options and the year, on some versions there will not be enough space for you to swap the bulb in this way. Here are the two different methods to swap the bulb of the front parking light of your Ford Fusion:.

  • Going through the bonnet of your car: First methodology, you will only go through the bonnet of your automobile to direct access your headlight unit. This is the most logical process but it is not always easy to do to accomplish, generally because of secondary auto parts that will block your access. To achieve this, here are the basic steps to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been done, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Ford Fusion. You may possibly need to take off the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to take off the bulb socket from its area. To achieve this, pull gently on the socket and not on the wires (you risk damaging them), at last once the socket is out, you can swap your parking lamps bulb, being careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once finished, reassemble the assembly, reconnect your battery and execute a check test before taking to the road.
  • By taking out the crosshair grill and the headlight:
  • Second option, you can remove the headlight of your Ford Fusion if it turns out the access through the engine block seems too challenging. To do this, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these actions are achieved you will only have to follow the same method as on the previous section to swap the front daytime running light bulb of your Ford Fusion

.

How to swap the rear parking light bulb on your Ford Fusion

To conclude, if you desire to swap the rear parking light bulb of your Ford Fusion the methodology is much simpler, here are the different steps to follow to allow you to swap this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Insert your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Examine that your parking lights are operating correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Ford Fusion, please browse our specific content page to find out how to do it.

To find more tips on the Ford Fusion, take a look at the Ford Fusion category.