Regardless of it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly operational is quite important. In fact, bulbs are wearing parts that will surely burn out as time passes and consequently need to be swapped out. You’re most likely in this article because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Ford Explorer parking light, we’ve posted this content to help you do this process on your own and not need to go to your auto mechanic. In a first part, we will look at changing the front daytime running light bulb of your car and in a second section, how to swap the rear daytime running light.
How to swap the front parking light bulb of my Ford Explorer?
We will begin this article content with changing the front daytime running light bulb of your Ford Explorer, take notice that depending on the year and finish of your car it may not be quite the same method to use. In fact, even if the location of your bulb is not going to change, the access may be more or less problematic depending on the features of your car.
First method, we will perform the bulb swap of your daytime running light without removing the headlight of your Ford Explorer. Although this method is the easiest, it is not assured that you will be able to execute it on your vehicle without trouble. In fact, dependant on the versions and the year, on some versions there will not be enough space for you to swap the bulb using this method. Here are the two distinct methods to swap the bulb of the front parking light of your Ford Explorer:.
- Going through the bonnet of your car: First technique, you will simply go through the bonnet of your vehicle to access your headlight unit. This is the most rational method but it is not always easy to do to realise, sometimes because of secondary parts that will block your access. To accomplish this, here are the simple steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this step has been finished, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Ford Explorer. You may need to take out the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to take out the bulb socket from its location. To accomplish this, pull carefully on the socket and not on the wires (you risk damaging them), finally when the socket is out, you can swap your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once done, reassemble the assembly, reconnect your battery and accomplish a check test before taking to the road.
- By removing the crosshair grill and the headlight:
- Second option, you can remove the headlight of your Ford Explorer if it turns out the access through the engine block seems too obstructed. To do so, you just have to open your bonnet, take out the front grill held by only a few torx screws, then take out the headlight in question. Once these actions are done you will simply have to follow the same methodology as on the previous section to swap the front daytime running light bulb of your Ford Explorer
.
How to swap the rear parking light bulb on your Ford Explorer
To conclude, if you wish to replace the rear parking light bulb of your Ford Explorer the process is more simple, here are the different actions to follow to allow you to replace this bulb:
- Disconnect your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
- Place your new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Verify that your parking lights are functioning correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Ford Explorer, please read our dedicated article to find out how to do it.
To find more tips on the Ford Explorer, take a look at the Ford Explorer category.
