It doesn’t matter if it’s for your personal security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are constantly working is quite important. In fact, bulbs are wearing parts that will inevitably burn out as time passes and as a result need to be changed. You’re most likely here because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Ford Expedition parking light, we’ve created this article content to help you do this procedure by yourself and not need to go to your auto technician. In a first part, we will look into swapping the front daytime running light bulb of your car and in a second section, how to swap the rear daytime running light.

change-parking-light-ford-expedition

How to swap the front parking light bulb of my Ford Expedition?

We will commence this content with replacing the front daytime running light bulb of your Ford Expedition, be aware that based on the year and finish of your car it may not be quite the same technique to use. In fact, whether or not the position of your bulb is not going to change, the access may be more or less challenging based on the features of your car.

First technique, we will execute the bulb swap of your daytime running light without taking out the headlight of your Ford Expedition. Although this technique is the easiest, it is not guaranteed that you will be in a position to perform it on your vehicle without encumbrance. In fact, depending on the options and the year, on some versions there will not be enough space for you to swap the bulb in this way. Here are the two different techniques to swap the bulb of the front parking light of your Ford Expedition:.

  • Going through the bonnet of your car: First strategy, you will simply go through the bonnet of your vehicle to access your headlight unit. This is the most rational process but it is not always easy to achieve, sometimes because of secondary auto parts that will obstruct your access. To achieve this, here are the guidelines to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been completed, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Ford Expedition. You may possibly need to remove the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to remove the bulb socket from its area. To achieve this, pull gently on the socket and not on the wires (you risk damaging them), at last now that the socket is out, you can swap your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once done, reassemble the assembly, reconnect your battery and execute a check test before taking to the road.
  • By taking out the crosshair grill and the headlight:
  • Second alternative, you can remove the headlight of your Ford Expedition if the access through the engine block seems too complicated. To do so, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these steps are completed you will just have to stick to the same technique as on the previous section to swap the front daytime running light bulb of your Ford Expedition

.

How to swap the rear parking light bulb on your Ford Expedition

To conclude, if you desire to swap the rear parking light bulb of your Ford Expedition the approach is much simpler, here are the different guidelines to stick to to allow you to swap this bulb:

  • Unplug your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Insert your new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Check that your parking lights are operating correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Ford Expedition, please read our specific document to learn how to do it.

To get more tips on the Ford Expedition, take a look at the Ford Expedition category.