Regardless of it’s for your personal security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are constantly working is necessary. In reality, bulbs are wearing parts that will obviously burn out as time passes and as a result need to be replaced. You’re probably on this site because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Ford Crown Victoria parking light, we’ve made this content to help you do this operation without help and not need to go to your repair shop. In a first step, we will look into changing the front daytime running light bulb of your motor vehicle and in a second step, how to replace the rear daytime running light.


How to replace the front parking light bulb of my Ford Crown Victoria?

We will commence this document with swapping the front daytime running light bulb of your Ford Crown Victoria, bear in mind that based on the year and finish of your motor vehicle it may not be quite the same solution to use. In reality, even if the location of your bulb is not going to change, the access may be more or less difficult based on the features of your car.

First solution, we will conduct the bulb swap of your daytime running light without taking out the headlight of your Ford Crown Victoria. Although this process is the most simple, it is not assured that you will be in a position to perform it on your vehicle without encumbrance. In reality, depending on the versions and the year, on some models there will not be enough space for you to replace the bulb that way. Here are the two different techniques to replace the bulb of the front parking light of your Ford Crown Victoria:.

  • Going through the bonnet of your car: First solution, you will only go through the bonnet of your vehicle to access your headlight unit. This is the most logical approach but it is not always easy to realise, generally because of secondary auto parts that will block your access. To accomplish this, here are the steps to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been finished, you will need to access the back of your headlight unit to replace the daytime running light bulb on your Ford Crown Victoria. You may possibly need to take off the battery for easier access. In this instance, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to take off the bulb socket from its area. To accomplish this, pull delicately on the socket and not on the wires (you risk damaging them), finally once the socket is out, you can replace your parking lamps bulb, being cautious not to damage the wires and use a cloth to avoid dirtying your new bulb. Once finished, reassemble the assembly, reconnect your battery and execute a check test before taking to the road.
  • By taking out the crosshair grill and the headlight:
  • Second alternative, you can remove the headlight of your Ford Crown Victoria in the event that the access through the engine block seems too difficult. To do this, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these actions are done you will only have to follow the same method as on the previous part to replace the front daytime running light bulb of your Ford Crown Victoria


How to replace the rear parking light bulb on your Ford Crown Victoria

Finally, if you want to swap the rear parking light bulb of your Ford Crown Victoria the method is much easier, here are the different basic steps to follow to allow you to swap this bulb:

  • Unplug your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Put in your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Check that your parking lights are operating properly again before you set off again and you’re done. If you want to change the fog light bulb on your Ford Crown Victoria, please browse our specific content to learn how to do it.

In the event that you have any further questions about the Ford Crown Victoria, do not hesitate to consult our Ford Crown Victoria category.