It doesn’t matter if it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are constantly operational is pretty important. In reality, bulbs are wearing parts that will inevitably burn out as time passes and consequently need to be swapped out. You’re likely here because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Ford C-max 2 parking light, we’ve posted this article content to help you do this procedure without help and not need to go to your auto technician. In a first part, we will look at changing the front daytime running light bulb of your motor vehicle and in a second art, how to change the rear daytime running light.

change-parking-light-ford-c-max-2

How to change the front parking light bulb of my Ford C-max 2?

We will begin this content page with exchanging the front daytime running light bulb of your Ford C-max 2, take notice that depending on the year and finish of your motor vehicle it may not be quite the same solution to use. In reality, whether or not the position of your bulb is not going to change, the access may be more or less problematic based on the features of your car.

First solution, we will conduct the bulb change of your daytime running light without getting rid of the headlight of your Ford C-max 2. Although this technique is the easiest, it is not assured that you will be in a position to do it on your automobile without trouble. In reality, dependant on the versions and the year, on some versions there will not be enough space for you to change the bulb in this way. Here are the two different techniques to change the bulb of the front parking light of your Ford C-max 2:.

  • Going through the bonnet of your car: First solution, you will only go through the bonnet of your automobile to direct access your headlight unit. This is the most logical technique but it is not always easy to do to achieve, generally because of secondary parts that will block your access. To get this done, here are the simple steps to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this step has been accomplished, you will need to access the back of your headlight unit to change the daytime running light bulb on your Ford C-max 2. You may perhaps need to take off the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to take off the bulb socket from its area. To get this done, pull carefully on the socket and not on the wires (you risk damaging them), at last when the socket is out, you can change your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once accomplished, reassemble the set up, reconnect your battery and perform a check test before taking to the road.
  • By getting rid of the crosshair grill and the headlight:
  • Second solution, you can remove the headlight of your Ford C-max 2 if the access through the engine block seems too complicated. To accomplish this, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these actions are done you will only have to follow the same technique as on the previous section to change the front daytime running light bulb of your Ford C-max 2

.

How to change the rear parking light bulb on your Ford C-max 2

Finally, if you want to change the rear parking light bulb of your Ford C-max 2 the process is much simpler, here are the different guidelines to follow to allow you to change this bulb:

  • Unplug your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Insert your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Verify that your parking lights are working properly again before you set off again and you’re done. If you want to change the fog light bulb on your Ford C-max 2, please browse our specific content to learn how to do it.

In the event that you have any further questions about the Ford C-max 2, do not hesitate to consult our Ford C-max 2 category.