Regardless it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly working is pretty important. Indeed, bulbs are wearing parts that will definitely burn out over time and therefore need to be replaced. You’re likely here because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Dodge Nitro parking light, we’ve written this article to help you do this action without hiring somebody and not need to go to your mechanic. In a first part, we will look at changing the front daytime running light bulb of your motor vehicle and in a second step, how to replace the rear daytime running light.

change-parking-light-dodge-nitro

How to replace the front parking light bulb of my Dodge Nitro?

We will begin this article with changing the front daytime running light bulb of your Dodge Nitro, take note that depending on the year and finish of your motor vehicle it may not be quite the same technique to use. Indeed, whether or not the location of your bulb is not going to change, the access may be more or less problematic based on the features of your car.

First technique, we will perform the bulb swap of your daytime running light without removing the headlight of your Dodge Nitro. Although this process is the easiest, it is not guaranteed that you will be able to accomplish it on your motor vehicle without encumbrance. Indeed, depending on the options and the year, on some models there will not be enough space for you to replace the bulb like this. Here are the two distinct solutions to replace the bulb of the front parking light of your Dodge Nitro:.

  • Going through the bonnet of your car: First methodology, you will simply go through the bonnet of your motor vehicle to direct access your headlight unit. This is the most wise technique but it is not always easy to do to realise, sometimes because of secondary auto parts that will block your access. To perform this, here are the basic steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this stage has been done, you will need to access the back of your headlight unit to replace the daytime running light bulb on your Dodge Nitro. You might need to take out the battery for easier access. In this instance, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to take out the bulb socket from its area. To perform this, pull carefully on the socket and not on the wires (you risk damaging them), finally now that the socket is out, you can replace your parking lamps bulb, being cautious not to damage the wires and use a cloth to avoid dirtying your new bulb. Once carried out, reassemble the set up, reconnect your battery and accomplish a check test before taking to the road.
  • By removing the crosshair grill and the headlight:
  • Second solution, you can remove the headlight of your Dodge Nitro in the event that the access through the engine block seems too challenging. To do so, you just have to open your bonnet, take out the front grill held by only a few torx screws, then take out the headlight in question. Once these steps are done you will simply have to stick to the same technique as on the previous part to replace the front daytime running light bulb of your Dodge Nitro

.

How to replace the rear parking light bulb on your Dodge Nitro

Finally, if you want to swap the rear parking light bulb of your Dodge Nitro the method is incredibly easier, here are the different basic steps to stick to to allow you to swap this bulb:

  • Unplug your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Insert your new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Verify that your parking lights are functioning correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Dodge Nitro, please go through our specific content to learn how to do it.

If you wish more guides on the Dodge Nitro, go to our Dodge Nitro category.