Regardless of it’s for your own security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are constantly operational is quite important. In reality, bulbs are wearing parts that will definitely burn out after some time and consequently need to be changed. You’re probably here because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Dodge Caliber parking light, we’ve posted this article content to help you do this process on your own and not need to go to your motor mechanic. In a first step, we will look at swapping the front daytime running light bulb of your car and in a second art, how to swap the rear daytime running light.

change-parking-light-dodge-caliber

How to swap the front parking light bulb of my Dodge Caliber?

We will commence this content with changing the front daytime running light bulb of your Dodge Caliber, bear in mind that according to the year and finish of your car it may not be quite the same approach to use. In reality, even if the location of your bulb is not going to change, the access may be more or less problematic depending on the features of your car.

First approach, we will conduct the bulb swap of your daytime running light without taking out the headlight of your Dodge Caliber. Although this technique is the most basic, it is not guaranteed that you will be able to do it on your car without encumbrance. In reality, based on the versions and the year, on some versions there will not be enough space for you to swap the bulb that way. Here are the two distinct solutions to swap the bulb of the front parking light of your Dodge Caliber:.

  • Going through the bonnet of your car: First solution, you will simply go through the bonnet of your car to direct access your headlight unit. This is the most wise method but it is not always easy to do to accomplish, often because of secondary parts that will obstruct your access. To accomplish this, here are the guidelines to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this stage has been finished, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Dodge Caliber. You might need to remove the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to remove the bulb socket from its location. To accomplish this, pull carefully on the socket and not on the wires (you risk damaging them), at last when the socket is out, you can swap your parking lamps bulb, being careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once carried out, reassemble the system, reconnect your battery and do a check test before taking to the road.
  • By taking out the crosshair grill and the headlight:
  • Second option, you can remove the headlight of your Dodge Caliber in cases where the access through the engine block seems too obstructed. To do this, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these actions are achieved you will just have to follow the same method as on the previous part to swap the front daytime running light bulb of your Dodge Caliber

.

How to swap the rear parking light bulb on your Dodge Caliber

Finally, if you desire to swap the rear parking light bulb of your Dodge Caliber the method is much simpler, here are the different simple steps to follow to allow you to swap this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Put in your new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Check that your parking lights are working properly again before you set off again and you’re done. If you want to change the fog light bulb on your Dodge Caliber, please go through our dedicated article to find out how to do it.

To get more tips on the Dodge Caliber, take a look at the Dodge Caliber category.