Regardless of it’s for your personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are always functional is pretty important. In fact, bulbs are wearing parts that will surely burn out with time and as a result need to be replaced. You’re probably on this site because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Chrysler Town & Country parking light, we’ve written this content page to help you do this operation without any help and not need to go to your repair shop. In a first part, we will take a look at swapping the front daytime running light bulb of your motor vehicle and in a second section, how to swap the rear daytime running light.
How to swap the front parking light bulb of my Chrysler Town & Country?
We will commence this article content with swapping the front daytime running light bulb of your Chrysler Town & Country, remember that based on the year and finish of your motor vehicle it may not be quite the same approach to use. In fact, whether or not the position of your bulb is not going to change, the access may be more or less complex based on the features of your car.
First approach, we will perform the bulb change of your daytime running light without getting rid of the headlight of your Chrysler Town & Country. Although this technique is the most basic, it is not guaranteed that you will be in a position to execute it on your car without encumbrance. In fact, depending on the versions and the year, on some models there will not be enough space for you to swap the bulb by doing this. Here are the two different techniques to swap the bulb of the front parking light of your Chrysler Town & Country:.
- Going through the bonnet of your car: First approach, you will simply go through the bonnet of your car to access your headlight unit. This is the most rational process but it is not always easy to accomplish, sometimes because of secondary auto parts that will block your access. To perform this, here are the steps to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been done, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Chrysler Town & Country. You might need to take off the battery for easier access. In this instance, you will need to open the bulb protection cap on your headlight (¼ generally does the job), then you will need to take off the bulb socket from its location. To perform this, pull carefully on the socket and not on the wires (you risk damaging them), at last when the socket is out, you can swap your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once completed, reassemble the assembly, reconnect your battery and execute a check test before taking to the road.
- By getting rid of the crosshair grill and the headlight:
- Second alternative, you can remove the headlight of your Chrysler Town & Country if it turns out the access through the engine block seems too obstructed. To accomplish this, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these steps are done you will just have to stick to the same methodology as on the previous part to swap the front daytime running light bulb of your Chrysler Town & Country
.
How to swap the rear parking light bulb on your Chrysler Town & Country
To conclude, if you need to replace the rear parking light bulb of your Chrysler Town & Country the method is much easier, here are the different basic steps to stick to to allow you to replace this bulb:
- Disconnect your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
- Place your new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Verify that your parking lights are functioning properly again before you set off again and you’re done. If you want to change the fog light bulb on your Chrysler Town & Country, please read our dedicated article content to find out how to do it.
If you want more tutorials on the Chrysler Town & Country, go to our Chrysler Town & Country category.
