Regardless it’s for your personal safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly functional is important and vital. In reality, bulbs are wearing parts that will surely burn out with time and consequently need to be changed. You’re most likely on this website because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Chrysler Sebring parking light, we’ve posted this article to help you do this action without help and not need to go to your auto mechanic. In a first part, we will look at swapping the front daytime running light bulb of your motor vehicle and in a second art, how to swap the rear daytime running light.
How to swap the front parking light bulb of my Chrysler Sebring?
We will begin this content page with changing the front daytime running light bulb of your Chrysler Sebring, take note that according to the year and finish of your motor vehicle it may not be quite the same technique to use. In reality, whether or not the location of your bulb is not going to change, the access may be more or less problematic based on the features of your car.
First technique, we will conduct the bulb swap of your daytime running light without removing the headlight of your Chrysler Sebring. Although this approach is the most basic, it is not assured that you will be able to perform it on your car without encumbrance. In reality, depending on the options and the year, on some models there will not be enough space for you to swap the bulb by doing this. Here are the two distinct methods to swap the bulb of the front parking light of your Chrysler Sebring:.
- Going through the bonnet of your car: First approach, you will only go through the bonnet of your car to access your headlight unit. This is the most logical process but it is not always easy to achieve, sometimes because of secondary parts that will obstruct your access. To achieve this, here are the basic steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this stage has been completed, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Chrysler Sebring. You may perhaps need to take off the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ generally does the job), then you will need to take off the bulb socket from its position. To achieve this, pull gently on the socket and not on the wires (you risk damaging them), finally once the socket is out, you can swap your parking lamps bulb, being cautious not to damage the wires and use a cloth to avoid dirtying your new bulb. Once completed, reassemble the system, reconnect your battery and perform a check test before taking to the road.
- By removing the crosshair grill and the headlight:
- Second alternative, you can remove the headlight of your Chrysler Sebring in the event that the access through the engine block seems too challenging. To accomplish this, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these steps are finished you will just have to stick to the same methodology as on the previous section to swap the front daytime running light bulb of your Chrysler Sebring
.
How to swap the rear parking light bulb on your Chrysler Sebring
Finally, if you wish to change the rear parking light bulb of your Chrysler Sebring the methodology is less difficult, here are the different simple steps to stick to to allow you to change this bulb:
- Disconnect your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
- Put in your brand-new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Verify that your parking lights are functioning properly again before you set off again and you’re done. If you want to change the fog light bulb on your Chrysler Sebring, please read our dedicated content page to learn how to do it.
Whenever you have any further questions about the Chrysler Sebring, do not hesitate to consult our Chrysler Sebring category.
