Whether it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are always functional is quite important. In reality, bulbs are wearing parts that will inevitably burn out after some time and therefore need to be changed. You’re most likely on this site because one of your position lamp is burnt out and you’re concerned about how to change the bulb of my Chrysler Pacifica parking light, we’ve posted this content to help you do this procedure without help and not need to go to your auto technician. In a first part, we will look into swapping the front daytime running light bulb of your motor vehicle and in a second art, how to swap the rear daytime running light.
How to swap the front parking light bulb of my Chrysler Pacifica?
We will commence this article content with replacing the front daytime running light bulb of your Chrysler Pacifica, bear in mind that according to the year and finish of your motor vehicle it may not be quite the same solution to use. In reality, even if the location of your bulb is not going to change, the access may be more or less difficult depending on the features of your car.
First solution, we will perform the bulb swap of your daytime running light without getting rid of the headlight of your Chrysler Pacifica. Although this technique is the easiest, it is not assured that you will be in a position to execute it on your automobile without encumbrance. In reality, dependant on the versions and the year, on some versions there will not be enough space for you to swap the bulb by doing this. Here are the two distinct ways to swap the bulb of the front parking light of your Chrysler Pacifica:.
- Going through the bonnet of your car: First solution, you will only go through the bonnet of your automobile to access your headlight unit. This is the most logical method but it is not always easy to do to achieve, generally because of secondary parts that will obstruct your access. To do this, here are the guidelines to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this stage has been completed, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Chrysler Pacifica. You may need to take out the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to take out the bulb socket from its location. To do this, pull gently on the socket and not on the wires (you risk damaging them), at last once the socket is out, you can swap your parking lamps bulb, being very careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once done, reassemble the assembly, reconnect your battery and accomplish a check test before taking to the road.
- By getting rid of the crosshair grill and the headlight:
- Second alternative, you can remove the headlight of your Chrysler Pacifica if the access through the engine block seems too challenging. To accomplish this, you just have to open your bonnet, take out the front grill held by only a few torx screws, then take out the headlight in question. Once these steps are completed you will only have to follow the same technique as on the previous part to swap the front daytime running light bulb of your Chrysler Pacifica
.
How to swap the rear parking light bulb on your Chrysler Pacifica
To conclude, if you want to replace the rear parking light bulb of your Chrysler Pacifica the technique is much easier, here are the different guidelines to follow to allow you to replace this bulb:
- Disconnect your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
- Put in your brand-new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Check that your parking lights are working properly again before you set off again and you’re done. If you want to change the fog light bulb on your Chrysler Pacifica, please browse our dedicated content page to learn how to do it.
Whenever you have any additional questions about the Chrysler Pacifica, do not hesitate to consult our Chrysler Pacifica category.
