Regardless of it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly functional is quite important. Indeed, bulbs are wearing parts that will surely burn out after some time and as a consequence need to be changed. You’re most likely here because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Chrysler 200 parking light, we’ve created this content to help you do this operation without hiring somebody and not need to go to your repair shop. In a first part, we will take a look at changing the front daytime running light bulb of your car and in a second section, how to change the rear daytime running light.
How to change the front parking light bulb of my Chrysler 200?
We will start this content page with swapping the front daytime running light bulb of your Chrysler 200, remember that based on the year and finish of your car it may not be quite the same methodology to use. Indeed, even if the location of your bulb is not going to change, the access may be more or less difficult based on the features of your car.
First methodology, we will perform the bulb change of your daytime running light without getting rid of the headlight of your Chrysler 200. Although this approach is the most basic, it is not assured that you will be able to execute it on your motor vehicle without encumbrance. Indeed, dependant on the versions and the year, on some models there will not be enough space for you to change the bulb in this way. Here are the two different solutions to change the bulb of the front parking light of your Chrysler 200:.
- Going through the bonnet of your car: First technique, you will only go through the bonnet of your motor vehicle to direct access your headlight unit. This is the most wise technique but it is not always easy to do to realise, generally because of secondary parts that will block your access. To get this done, here are the basic steps to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this stage has been accomplished, you will need to access the back of your headlight unit to change the daytime running light bulb on your Chrysler 200. You may perhaps need to remove the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ generally does the job), then you will need to remove the bulb socket from its position. To get this done, pull carefully on the socket and not on the wires (you risk damaging them), at last now that the socket is out, you can change your parking lamps bulb, being cautious not to damage the wires and use a cloth to avoid dirtying your new bulb. Once done, reassemble the system, reconnect your battery and accomplish a check test before taking to the road.
- By getting rid of the crosshair grill and the headlight:
- Second alternative, you can remove the headlight of your Chrysler 200 if it turns out the access through the engine block seems too complicated. To do this, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these actions are completed you will only have to follow the same method as on the previous part to change the front daytime running light bulb of your Chrysler 200
.
How to change the rear parking light bulb on your Chrysler 200
To conclude, if you wish to swap the rear parking light bulb of your Chrysler 200 the technique is incredibly easier, here are the different actions to follow to allow you to swap this bulb:
- Disconnect your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
- Put in your new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Examine that your parking lights are operating correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Chrysler 200, please go through our dedicated content page to discover how to do it.
To discover more tips on the Chrysler 200, take a look at the Chrysler 200 category.
