Regardless of it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are always operational is quite important. In reality, bulbs are wearing parts that will inevitably burn out with time and therefore need to be replaced. You’re almost certainly on this site because one of your position lamp is burnt out and you’re concerned about how to change the bulb of my Acura MDX parking light, we’ve posted this article to help you do this operation by yourself and not need to go to your mechanic. In a first part, we will look at replacing the front daytime running light bulb of your motor vehicle and in a second art, how to replace the rear daytime running light.

change-parking-light-acura-mdx

How to replace the front parking light bulb of my Acura MDX?

We will begin this document with exchanging the front daytime running light bulb of your Acura MDX, take note that according to the year and finish of your motor vehicle it may not be quite the same technique to use. In reality, regardless if the location of your bulb is not going to change, the access may be more or less complicated depending on the features of your car.

First technique, we will conduct the bulb change of your daytime running light without taking out the headlight of your Acura MDX. Although this process is the most basic, it is not assured that you will be in a position to do it on your motor vehicle without trouble. In reality, based on the versions and the year, on some versions there will not be enough space for you to replace the bulb that way. Here are the two different techniques to replace the bulb of the front parking light of your Acura MDX:.

  • Going through the bonnet of your car: First methodology, you will simply go through the bonnet of your motor vehicle to access your headlight unit. This is the most wise process but it is not always easy to do to achieve, generally because of secondary auto parts that will obstruct your access. To accomplish this, here are the steps to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been accomplished, you will need to access the back of your headlight unit to replace the daytime running light bulb on your Acura MDX. You may possibly need to take out the battery for easier access. In this instance, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to take out the bulb socket from its area. To accomplish this, pull delicately on the socket and not on the wires (you risk damaging them), at last once the socket is out, you can replace your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once carried out, reassemble the system, reconnect your battery and execute a check test before taking to the road.
  • By taking out the crosshair grill and the headlight:
  • Second option, you can remove the headlight of your Acura MDX if it turns out the access through the engine block seems too challenging. To do so, you just have to open your bonnet, take out the front grill held by only a few torx screws, then take out the headlight in question. Once these steps are finished you will simply have to follow the same methodology as on the previous section to replace the front daytime running light bulb of your Acura MDX

.

How to replace the rear parking light bulb on your Acura MDX

Finally, if you want to swap the rear parking light bulb of your Acura MDX the technique is incredibly easier, here are the different simple steps to follow to allow you to swap this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Put in your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Examine that your parking lights are functioning properly again before you set off again and you’re done. If you want to change the fog light bulb on your Acura MDX, please go through our specific article to learn how to do it.

If you want more tutorials on the Acura MDX, go to our Acura MDX category.